[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Auto Provisioning Hangs
Author Message
Rus Offline
Junior Member
**

Posts: 11
Joined: Mar 2018
Reputation: 0
Post: #2
RE: Auto Provisioning Hangs
(10-16-2018 11:49 AM)Rus Wrote:  Here is my issue:
A T46G running 28.73.0.28 boots and looks at the Yealink RPS where it picks up the url: https://<provurl>/Yealink/enc.cfg

The enc file is there to tell the phone to use encryption and then provide a new url: https://<provurl>/Yealink

This is where the <mac>.cfg, <mac>_Security.enc and Aeskey.txt files are kept.

This works very well if the firmware is, for example: 28.83.0.35

But with the earlier firmware, the enc.cfg file is accessed but the phone never loads.


I have tried including the following inside the enc.cfg file: but the phone still will not load the file so cannot pickup the firmware upgrade.
firmware.url = https://<provurl>/Yealink/Firmware/28.83.0.10.rom

even if I include: auto_provision.reboot_force.enable =1

Have you any clues as to what is going wrong here?

enc.cfg attached

I have drilled down into this a little.

It seems that any fw release below 80 and below, does not correctly access the enc file.
all releases (tested 73-83) access the RPS which points to the provisioning url and includes the filename enc.cfg. However only fw v83 appears to attempt to access the enc.cfg file.

This only seems to have become an issue with the RPS redesign.

Is anyone else having these issues or know how to resolve?
10-17-2018 11:06 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
Auto Provisioning Hangs - Rus - 10-16-2018, 11:49 AM
RE: Auto Provisioning Hangs - Rus - 10-17-2018 11:06 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Setting of lang.gui via remote provisioning cloudaware 1 41 Yesterday 07:11 PM
Last Post: cloudaware
  zero touch provisioning & firewall gareth20202 2 299 10-09-2021 04:55 PM
Last Post: Phil2021
  Step by Step for Auto Provisioning nguyenp 2 2,948 08-06-2021 04:27 PM
Last Post: Phil2021
  Auto-Provision W60P on FreeSWITCH Phoneperson 10 11,225 03-06-2021 03:51 AM
Last Post: Phoneperson
  disable provisioning on T26P yeaphild 0 2,090 02-25-2021 07:25 PM
Last Post: yeaphild
  Provisioning only works on startup Snapdragons 3 3,920 09-29-2020 12:49 AM
Last Post: Jay_Yealink
  Provisioning of W60B Speeddial secure42tganick 3 3,894 07-30-2020 10:27 AM
Last Post: complex1
  T42G toggling between UDP and TLS on provisioning GNIL 0 1,792 04-28-2020 02:12 PM
Last Post: GNIL
  Auto provisioning seams to be (partly) broken in version 83 for T46G HaraldL 2 6,392 07-02-2019 03:04 PM
Last Post: Fraukas2
Lightbulb Auto provision firmware ... Yuriy Y. 1 4,673 04-26-2019 05:40 AM
Last Post: Yuriy Y.

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication