[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Some XML help required
Author Message
jolouis Offline
Moderator
*****

Posts: 339
Joined: Oct 2013
Reputation: 6
Post: #2
RE: Some XML help required
(10-03-2018 10:59 AM)Eric.GoodAdvice Wrote:  The PBX does not support provisioning or the forward status by the phone, so i've been setting up XML to dial DTMF to set a static forward...

Not related to your XML specifically, but what exactly are you trying to achieve that the normal Call Forward feature of the phone itself would not do?

Yealink phones don't necessarily need any kind of hint or support on the PBX side to show the forward status, all you need is the pBX to support a forwarding DTMF code. If you configure this, when the user turns on call forward through the built in features menu/button, the phone will automatically transmit the DTMF code along with the phone number to the PBX as if the user had dialed it.

Similiarly, you can configure a DTMF code to be sent when call forward is turned off on the phone. Ideally those are two discreet codes to avoid confusion, but worst case you could use the same code and assume a toggle between the two states.

Take a look at the Features -> Forward & DND -> OnCode Off code options.
10-05-2018 07:32 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
Some XML help required - Eric.GoodAdvice - 10-03-2018, 10:59 AM
RE: Some XML help required - jolouis - 10-05-2018 07:32 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Provisioning Issue auto_provision.power_on = 1 required for Sip Notify Frank Drews 3 10,509 07-17-2015 11:12 PM
Last Post: Frank Drews

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication