[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T41P Multiple 'static' forwarders via DSSKEY
Author Message
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,509
Joined: Jan 2014
Reputation: 44
Post: #3
RE: T41P Multiple 'static' forwarders via DSSKEY
(09-20-2018 02:20 PM)Eric.GoodAdvice Wrote:  Hey there,

situation is as followed:
Company has 3 employees that rotate the after hours shift.
A previous admin had it set up so that on the phone, a DSSKey could be pressed, and all calls would be forwarded to the mobile nr. that was on call for that day.

After we took over the IT for the company, the forwarding options were no longer present on the phone (maybe deleted?).

The customer wants this same situation back.

i've tried
Type = Forward
Value = Mobile number
Label = The Dude

This seemingly does nothing

i've tried
Type = XML Browser
Value = path to xml
Label = The Dude

XML:
Code:
<YealinkIPPhoneExecute Beep="Yes">
<ExecuteItem URI="Key:HANDFREE"/>
<ExecuteItem URI="Dial:*72#mobilenr#" interrupetcall="no"/>
</YealinkIPPhoneExecute>

I found somewhere that *72#nr# is used for Yealink, even though my country uses *21*nr#
When trying to manually forward with *21*nr# on the phone, this indeed does nothing (or isn't recognized).


Work arounds via Always Forward on the portal page of the phone is a no-go.
The customer wants to use the DSSKey to forward to 1 of 3 people via 3 buttons.
A 4th button can be used to remove the forward.

Further info:
There is no dial plan set up
The firmware version = 36.80.188.11
Have tried using Forward and Transfer in DSSKey types. These do not provide a static forward.


Please let me know any info you require to help me work towards the situation the customer desires.

Hallo Eric,

Using the Dsskey for what you have in mind only works if the value of the parameter “features.fwd.allow” is set to 1 (Enabled) and value of the parameter “features.fwd_mode” is set to 1 (Custom).

Please also upgrade the firmware to latest available 36.81.188.7

Hope this will help.

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
09-20-2018 05:59 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: T41P Multiple 'static' forwarders via DSSKEY - complex1 - 09-20-2018 05:59 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T46G Multiple EXT Port amandah 2 1,978 04-04-2023 01:06 AM
Last Post: Yisroel_MongoTEL
Bug T41P OpenVPN w/ PSK fails rnalrd 0 997 01-20-2023 10:52 PM
Last Post: rnalrd
Question Sip - T41P - Displaying wrong information and can't redial StaceyStorm 1 1,763 10-14-2022 11:19 PM
Last Post: complex1
  Multiple lines for 1 extension here4real 1 2,654 03-10-2022 04:48 AM
Last Post: here4real
  T41P/T48G/T58V IPv6 SIP Issues ReubenFarrelly 22 63,183 08-01-2021 06:14 PM
Last Post: Phil2021
  T41P Yealink phone wants to talk to the Verizon mother ship nestman 1 5,034 06-14-2021 05:00 PM
Last Post: complex1
  T41P and OpenVPN coltarushalo 0 3,228 05-26-2021 02:58 AM
Last Post: coltarushalo
  Yealink T40G Requests DHCP even though it has a static IP address DcData_Support 1 4,454 04-30-2021 01:53 AM
Last Post: complex1
  Yealink T41s Multiple sip Accounts scorpio313 0 3,798 07-30-2020 08:13 PM
Last Post: scorpio313
  T41P custom logo ausadmin 1 6,050 05-17-2020 08:21 AM
Last Post: complex1

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication