[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T48G + EHS36 + Sennheiser DW Pro - No Ring Tone
Author Message
knewgent Offline
Junior Member
**

Posts: 5
Joined: Aug 2022
Reputation: 0
Post: #2
RE: T48G + EHS36 + Sennheiser DW Pro - No Ring Tone
(08-15-2018 03:48 PM)miclan Wrote:  Hi Yealink,

customer wants to hear a ring tone from the headset on an incoming call.
Can't get this to work.

Is this supported?

Thanks for y answer

Miclan

The EHS36 is one of the more difficult hookswitches to set up, so the issue could be in either how it is plugged in or the settings in the back of the Sennheiser.

If you happen to have one of the DW series, you can check out this article to show you how it needs to be set up.

One thing that could have easily been missed is moving the first dip switch in the back of the cube down, making sure number 2 is in the up position. If you notice 5 is down, leave it there, as this makes your battery last longer.

If you have it set up correctly, you can try a reset of this cord.
  • Unplug the power and USB (if plugged) in the back of the cube
  • Unplug the cord in the green phone port in back of headset base
  • Go to the back of the phone and unplug the cord in the headset jack
  • Then unplug the cord in either the EHS or EXT port
  • Lastly, plug everything back in, but in reverse order (EHS/EXT, headset port in phone, phone port in headset base, power and USB

If the headset came off of the cube, put it back on to get it synced back up and test. Usually, this will get everything fixed, so I wish you the best of luck!

Kyle Newgent
Headsets.com
08-25-2022 03:04 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: T48G + EHS36 + Sennheiser DW Pro - No Ring Tone - knewgent - 08-25-2022 03:04 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  UH38G Headset audio tone changes when microphone is grabbed by some applications lionelpcn 0 339 09-05-2022 04:13 AM
Last Post: lionelpcn
  SIP-T29G & EHS36 Need Off-Hook Signal! Rob2001 0 907 04-26-2022 09:05 PM
Last Post: Rob2001
  Compatible RJ12 cable for EHS36 bnmand 3 6,930 10-29-2020 04:23 PM
Last Post: complex1
  EHS36 dead with T46G SCPCJNR 1 5,183 10-27-2020 08:08 AM
Last Post: bnmand
  Update EHS36 with T41P? SPS 2 5,798 03-24-2020 01:20 PM
Last Post: Yisroel_MongoTEL
  t-29G with EHS36 and Plantronics CS510 davidfudge 1 6,115 12-02-2019 01:41 PM
Last Post: anonymous1669303959940
  T48G, EHS36 and Plantronics CS510 cmedvick 2 6,797 10-23-2019 02:17 PM
Last Post: cmedvick
Question A list of compatible wireless headsets together with the EHS36 or also directly USB? proofy 2 7,453 08-22-2019 06:08 AM
Last Post: Clan_Yealink
  T42S with EHS36 and Jabra920 RadekZ 1 5,094 06-18-2019 01:22 AM
Last Post: Kevin_Yealink
  Yealink T46S and Plantronics Savi 8200 +EHS36 ahcomput_Support 3 10,558 04-07-2019 03:54 PM
Last Post: ahcomput_Support

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication