New Forum system requires email address which you used to apply for your account to replace your original username. Password stays the same.Please see this post for more details
http://forum.yealink.com/forum/showthread.php?tid=40344

Yealink Test Club has been officially launched. Please visit post below to get detail information. Come and join us!
http://forum.yealink.com/forum/announcements.php?aid=18

We just had the YMCS online and we are also working on the features plan on the future versions, in this regard we are need to hear your voice about the YMCS.
Please visit : http://forum.yealink.com/forum/showthread.php?tid=42322


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[T48] - NTP time update fails
Author Message
DennisT Offline
Junior Member
**

Posts: 7
Joined: Apr 2015
Reputation: 0
Post: #1
[T48] - NTP time update fails
I have over a dozen T48G phones connected to a 3CX 12 system. Most of the phones are at Firmware v35.80.0.60. One is at v35.80.0.130. All phones are working fine, except one.

IDK if this problem was from day 1 or recent (users can be inconsistent on reporting issues).

Problem: This one phone displays the wrong date/time. When rebooting it starts at 12AM on May 7. NTP updates to the NTP server show update failed in the phone system debug log (logging @ 6). Everything else on the phone appears to be working fine (making calls, receiving, vmail, etc)

The NTP server (Win 2012 R2) is set to log the ntp activity. The NTP requests/response aren't materially different than activity for a phone that does update. The server is set to update regardless of the offset.

The phone is provisioned from the 3CX server and the configuration is the same used for all T48G phones. Phone is powered via POE.

Things I've tried:
1. Reboot phone. No change.
2. Reprovision phone - No change
3. Change the phone to manual clock, set it. - Time is correct
4. Set phone back to NTP. Reboot. Time is now starting at 12AM on July 17 (today). NTP in the log still shows fail.
5. Reset phone back to factory default settings. Rejoin the 3CX server and reprovision. No change.
6. Update firmware to 35.80.0.130. Reboot. No change

I'm hesitant to upgrade the firmware further as I don't know if a newer version will still work properly with the version of 3CX I'm running.

Suggestions? Is the phone defective?
07-17-2018 05:45 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
[T48] - NTP time update fails - DennisT - 07-17-2018 05:45 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Firmware update failed, any options? srenton 2 1,498 07-31-2019 07:21 AM
Last Post: antoineg
  T41S recovery from TFTP fails jwhopkins 3 632 07-25-2019 01:19 AM
Last Post: Baron_Yealink
  T48S after Firmware update to 66.9.0.80 no Downgrade possible? thomas.hauff 1 573 07-15-2019 03:06 PM
Last Post: East_Yealink
  T46s and T48s missing submenus after update mrchance 1 497 06-20-2019 01:59 PM
Last Post: complex1
  time not syn from NTP server ettaleb79 3 7,752 04-11-2019 01:06 PM
Last Post: Libertis
  T48G Registers Successfully, Then Later Fails blackoil 2 662 04-10-2019 09:48 PM
Last Post: blackoil
  Display steadily wakes up since update to FW 28.83.0.50 smartpc 0 631 11-10-2018 11:30 AM
Last Post: smartpc
  T40G defaults to ntp time? Retcheverry 0 614 10-26-2018 08:23 PM
Last Post: Retcheverry
  Default admin/admin don't work after Update to 66.84.0.10 hitzi 1 1,084 10-11-2018 03:27 PM
Last Post: complex1
  T48G Webrequest Time Outs? Solved Attila 0 812 07-07-2018 06:41 AM
Last Post: Attila

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication