[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Just firmware
Author Message
RC179 Offline
Junior Member
**

Posts: 2
Joined: Jul 2018
Reputation: 0
Post: #1
Just firmware
I need to do some very limited automation, right now it's just firmware updates but I'll be adding a few other options later. Some of these quests are dependent on others and there is some overlap as well. Hope I haven't made it too confusing.

When I specify the firmwareurl, am I specifying just the tftp server (and maybe the folder), or do I need to specify the filename as well (which I would need to change each time a new firmware is added). I'd rather not have to change the .cfg each time I add a firmware to the tftp server.

Can I put all the firmware updates (different models) in one directory, and the phones will just know which to use, or does each model require it's own directory?

So can I use a single common .cfg or do I have to use a model specific common .cfg for each model? I'm only pushing the firmware and not anything specific to the model.

If I only use one .cfg do I have to use the model specific prefix and have a firmwareurl statement for every model?

In either case, do I need a separate folder (on the tftp server) for each model or will the phones just know which firmware is for them? Is this dependent on keeping the original names on the firmware files?

If the .cfg file has not changed, so the phone doesn't pull a new copy, will it still pull the new firmware if that has changed?

What is the timeout on connecting to the tftp server?

If a configuration server is specified via dhcp, and the phone cannot connect to it, what configuration information is used?

It's very important that the current settings on the phones are not affected by the .cfg files (which will not contain any settings other than the firmware info). The actual phone configuration needs to stay on the phone for now.

Thanks
07-11-2018 06:59 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
Just firmware - RC179 - 07-11-2018 06:59 PM
RE: Just firmware - johnkiniston - 07-12-2018, 06:59 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  newest firmware for T4XS units causes bootup loop davedogmoore@gmail.com 0 509 01-21-2024 03:44 PM
Last Post: davedogmoore@gmail.com
  SIP-T46G Need firmware update instructions RobbyK 2 969 01-11-2024 10:52 PM
Last Post: RobbyK
  Firmware T42s Raimundo 1 1,341 11-23-2023 06:45 PM
Last Post: Darsh
  T41S FIRMWARE 66.9.0.80 vers 66.86.0.5 DANJEAN 1 1,801 08-23-2023 01:00 AM
Last Post: complex1
  Yealink SIP-T40P Firmware UnitedTech_Support 1 2,007 05-05-2023 08:07 PM
Last Post: complex1
  T48U Custom Firmware Upgrade to Official Friendly 0 1,928 03-29-2023 01:20 AM
Last Post: Friendly
  Yealink T41S firmware kosif 0 1,946 12-19-2022 08:52 AM
Last Post: kosif
  T42S unable to update firmware brianstoiber 6 7,759 09-30-2022 05:31 PM
Last Post: complex1
  Yealink T48s Firmware update failed dangmoss 2 7,387 02-19-2022 03:09 AM
Last Post: dangmoss
  Problem Change Firmware T48s from SFB to SIP Lars Maschke 2 6,481 01-14-2022 10:22 AM
Last Post: kumagera

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication