New Forum system requires email address which you used to apply for your account to replace your original username. Password stays the same.Please see this post for more details
http://forum.yealink.com/forum/showthread.php?tid=40344

Yealink Test Club has been officially launched. Please visit post below to get detail information. Come and join us!
http://forum.yealink.com/forum/announcements.php?aid=18


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Just firmware
Author Message
RC179 Offline
Junior Member
**

Posts: 1
Joined: Jul 2018
Reputation: 0
Post: #1
Just firmware
I need to do some very limited automation, right now it's just firmware updates but I'll be adding a few other options later. Some of these quests are dependent on others and there is some overlap as well. Hope I haven't made it too confusing.

When I specify the firmwareurl, am I specifying just the tftp server (and maybe the folder), or do I need to specify the filename as well (which I would need to change each time a new firmware is added). I'd rather not have to change the .cfg each time I add a firmware to the tftp server.

Can I put all the firmware updates (different models) in one directory, and the phones will just know which to use, or does each model require it's own directory?

So can I use a single common .cfg or do I have to use a model specific common .cfg for each model? I'm only pushing the firmware and not anything specific to the model.

If I only use one .cfg do I have to use the model specific prefix and have a firmwareurl statement for every model?

In either case, do I need a separate folder (on the tftp server) for each model or will the phones just know which firmware is for them? Is this dependent on keeping the original names on the firmware files?

If the .cfg file has not changed, so the phone doesn't pull a new copy, will it still pull the new firmware if that has changed?

What is the timeout on connecting to the tftp server?

If a configuration server is specified via dhcp, and the phone cannot connect to it, what configuration information is used?

It's very important that the current settings on the phones are not affected by the .cfg files (which will not contain any settings other than the firmware info). The actual phone configuration needs to stay on the phone for now.

Thanks
07-11-2018 06:59 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
Just firmware - RC179 - 07-11-2018 06:59 PM
RE: Just firmware - johnkiniston - 07-12-2018, 06:59 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T41S Getting Unrecognized USB device with DD10K and newest firmware Bezalu 5 143 07-11-2018 01:28 PM
Last Post: jolouis
  T46 and T48 firmware update to 83. KenDoerksen 1 461 05-08-2018 11:41 AM
Last Post: Evan_Yealink
  Bug Report: VPN no longer functions with firmware 29.83.x.x KNERD 1 251 04-24-2018 12:08 PM
Last Post: Samuel_Yealink
  yealink fonality transition firmware lts 1 259 04-16-2018 11:50 AM
Last Post: Aaron_Yealink
  36.82.0.30 firmware T41 upgrade to V83 Chris Barron 4 740 03-30-2018 09:12 PM
Last Post: Chris Barron
  T48S SFB Firmware Gianb 7 1,620 03-28-2018 03:30 PM
Last Post: Evan_Yealink
  T48G S4B firmware and WF40 wifi dongle noel_leahy 5 2,342 03-16-2018 02:32 PM
Last Post: Rance
  T46s Firmware Downgrade Bernhard77 0 345 03-02-2018 09:02 AM
Last Post: Bernhard77
  Need to remove custom Fonality firmware 1CCT 2 660 02-22-2018 11:09 PM
Last Post: FrankG
  Yealink T46G/S power saving mode on 66.82.0.20 firmware kristof.daylesford 2 796 02-20-2018 02:49 PM
Last Post: kristof.daylesford

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication