[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T48S Autoprovision admin password
Author Message
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,284
Joined: Jan 2014
Reputation: 39
Post: #2
RE: T48S Autoprovision admin password
(06-12-2018 11:48 AM)srcurtis Wrote:  Hi

I would like to know how to auto provision the admin password on the T48S.

I'm running firmware 66.83.0.35.

I've created a mac specific .boot file, phone general .cfg and phone specific .cfg.

TFTP server returns all three files:

Jun 12 12:38:07 voip3 in.tftpd[17710]: RRQ from 192.168.91.90 filename 805ec00116cd.boot
Jun 12 12:38:07 voip3 in.tftpd[17711]: RRQ from 192.168.91.90 filename y000000000065.cfg
Jun 12 12:38:07 voip3 in.tftpd[17712]: RRQ from 192.168.91.90 filename 805ec00116cd.cfg

In my y000000000065.cfg file I have the following (as a result of various attempts to set admin password):

Code:
#!version:1.0.0.1

##File header "#!version:1.0.0.1" can not be edited or deleted, and must be placed in the first line.##

static.security.user_name.admin = admin:<my_chosen_password>
static.security.user_password = admin:<my_chosen_password>
security.user_password = admin:<my_chosen_password>
security.user_name.admin = admin:<my_chosen_password>

None of these seem to do the trick.

Can you please let me know what the correct syntax is or suggest what I may be doing wrong?

Thanks

Steve

Hi,

Please try this syntax in the config file:
Code:
#!version:1.0.0.1

##File header "#!version:1.0.0.1" can not be edited or deleted, and must be placed in the first line.##

security.user_name.admin = admin
security.user_password = admin:<my_chosen_password>

Hope this will help.

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
06-12-2018 12:23 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: T48S Autoprovision admin password - complex1 - 06-12-2018 12:23 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T48S Very Slow Response nolto 1 95 08-11-2022 05:51 PM
Last Post: complex1
  Yealink T48S won't factory reset djcartledge 3 740 07-16-2022 05:16 PM
Last Post: complex1
  Yealink T48s Firmware update failed dangmoss 2 2,747 02-19-2022 03:09 AM
Last Post: dangmoss
  Problem Change Firmware T48s from SFB to SIP Lars Maschke 2 2,835 01-14-2022 10:22 AM
Last Post: kumagera
  Backlight comes on after autoprovision jonathanattwood 0 1,278 12-21-2021 10:30 PM
Last Post: jonathanattwood
  Factory reset T46s w/o admin password DanielP 7 10,643 12-02-2021 06:07 PM
Last Post: complex1
  T48s setting outbound caller ID thunderzhao 1 2,775 09-10-2021 04:08 PM
Last Post: complex1
Information How can I set the admin password for T46S during provisioning? proofy 4 9,799 07-08-2021 03:54 AM
Last Post: complex1
  T46S Password not recogised ....sometimes Hanno 3 6,124 04-30-2021 05:04 AM
Last Post: OlafE
  T48S Display Language change (Step by Step) schost 0 2,463 03-04-2021 04:02 PM
Last Post: schost

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication