[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Paging Volume
Author Message
Kevin_Yealink Offline
Administrator
*******

Posts: 204
Joined: Jul 2016
Reputation: 2
Post: #4
RE: Paging Volume
(05-09-2018 01:33 PM)ITSteve Wrote:  Hi Kevin,

1. Normal calls on the headset and speakerphone are fine. When I page, the phone has a loud tone introducing the page is starting. This works fine, and all the phones have the same volume for the tone, which is quite loud. When I begin to speak, each phone has it's own volume, possibly based on the speakerphone volume setting? I would like an option to set the paging volume independent of the other volume settings, so it is equally as loud as the tone.

2. Since submitting this post, I have tried multicast paging. There is no tone, which is not that big of a deal for us. And we are able to set the volume for the multicast page independent of the other volume settings. And it is sufficiently loud. I think this will be the solution for us.

We have about 40 phones. I was paging to about 16 of them. But with multicast I can send it to all of 40 of them, which seems to be a better solution anyway.

Thanks.

Hi Steve

Thank you for your information.
Currently we don't support to make paging call volume independent from normally call. It only can make speaker, handset audio path independent.

I think you can increase the volume to max level. For multicast, I think you can change that multicast codec to check again, I think it can increase the volume for you. Please check and let me know if any update.

Best Regards,
Kevin
05-10-2018 02:00 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
Paging Volume - ITSteve - 05-04-2018, 03:14 PM
RE: Paging Volume - Kevin_Yealink - 05-09-2018, 09:07 AM
RE: Paging Volume - ITSteve - 05-09-2018, 01:33 PM
RE: Paging Volume - Kevin_Yealink - 05-10-2018 02:00 AM
RE: Paging Volume - MattL - 12-23-2021, 12:58 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Multicast Paging And SIP Call nolto 1 2,333 09-24-2022 09:41 AM
Last Post: testlabuser2015
  Set Default Headset/Speaker Volume? troy44 3 4,480 07-16-2022 05:21 PM
Last Post: complex1
  Low intercom tone volume haukzinn 0 3,728 07-18-2020 08:27 PM
Last Post: haukzinn
  set ringer minimum volume bksales 18 49,189 11-13-2019 09:18 PM
Last Post: jolouis
  Headset volume too loud avayax 0 4,687 04-17-2019 01:07 AM
Last Post: avayax
  T20 web ringtone volume Diegoms 2 8,898 02-01-2018 12:59 PM
Last Post: Diegoms
  Paging Tone ChTanzer 1 7,245 09-21-2017 09:40 AM
Last Post: Karl_Yealink
  Multicast paging tone sunstatetech 3 11,535 05-04-2017 07:23 PM
Last Post: GIWM
  Headsets with volume control for speaking and hearing avayax 1 7,187 02-06-2017 03:16 AM
Last Post: Peter_Yealink
  Analog input to multicast paging rlsabin 4 16,589 11-03-2016 12:46 AM
Last Post: kahaen

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication