New Forum system requires email address which you used to apply for your account to replace your original username. Password stays the same.Please see this post for more details
http://forum.yealink.com/forum/showthread.php?tid=40344

Yealink Test Club has been officially launched. Please visit post below to get detail information. Come and join us!
http://forum.yealink.com/forum/announcements.php?aid=18

We just had the YMCS online and we are also working on the features plan on the future versions, in this regard we are need to hear your voice about the YMCS.
Please visit : http://forum.yealink.com/forum/showthread.php?tid=42322


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Paging Volume
Author Message
Kevin_Yealink Offline
Administrator
*******

Posts: 200
Joined: Jul 2016
Reputation: 2
Post: #4
RE: Paging Volume
(05-09-2018 01:33 PM)ITSteve Wrote:  Hi Kevin,

1. Normal calls on the headset and speakerphone are fine. When I page, the phone has a loud tone introducing the page is starting. This works fine, and all the phones have the same volume for the tone, which is quite loud. When I begin to speak, each phone has it's own volume, possibly based on the speakerphone volume setting? I would like an option to set the paging volume independent of the other volume settings, so it is equally as loud as the tone.

2. Since submitting this post, I have tried multicast paging. There is no tone, which is not that big of a deal for us. And we are able to set the volume for the multicast page independent of the other volume settings. And it is sufficiently loud. I think this will be the solution for us.

We have about 40 phones. I was paging to about 16 of them. But with multicast I can send it to all of 40 of them, which seems to be a better solution anyway.

Thanks.

Hi Steve

Thank you for your information.
Currently we don't support to make paging call volume independent from normally call. It only can make speaker, handset audio path independent.

I think you can increase the volume to max level. For multicast, I think you can change that multicast codec to check again, I think it can increase the volume for you. Please check and let me know if any update.

Best Regards,
Kevin
05-10-2018 02:00 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
Paging Volume - ITSteve - 05-04-2018, 03:14 PM
RE: Paging Volume - Kevin_Yealink - 05-09-2018, 09:07 AM
RE: Paging Volume - ITSteve - 05-09-2018, 01:33 PM
RE: Paging Volume - Kevin_Yealink - 05-10-2018 02:00 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Headset volume too loud avayax 0 351 04-17-2019 01:07 AM
Last Post: avayax
  set ringer minimum volume bksales 15 13,632 06-19-2018 05:47 PM
Last Post: JHT
  T20 web ringtone volume Diegoms 2 1,775 02-01-2018 12:59 PM
Last Post: Diegoms
  Paging Tone ChTanzer 1 1,767 09-21-2017 09:40 AM
Last Post: Karl_Yealink
  Multicast paging tone sunstatetech 3 3,638 05-04-2017 07:23 PM
Last Post: GIWM
  Headsets with volume control for speaking and hearing avayax 1 2,257 02-06-2017 03:16 AM
Last Post: Peter
  Analog input to multicast paging rlsabin 4 7,169 11-03-2016 12:46 AM
Last Post: kahaen
  LIMIT MINIMUM VOLUME rgpyealink 1 2,053 06-21-2016 05:59 AM
Last Post: Yealink_Michael
  multicast paging T-19 jpinder70 3 4,430 03-16-2016 04:08 AM
Last Post: abe_b
  Paging start on button press and hold? igorg 3 4,077 08-05-2015 02:36 PM
Last Post: sergeysi

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication