[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T46S Multicast from FreePBX
Author Message
Mike742 Offline
Junior Member
**

Posts: 1
Joined: Apr 2018
Reputation: 0
Post: #1
T46S Multicast from FreePBX
Greetings ~

We're actually implementing T46S, T40G and one form of T19 to replace our expensive as all-get-out Cisco system. Yealink works wonderfully as a phone and we like the multicast ability for various levels of campus-wide or focused alerts.

What we'd like to do, rather than use the Yealink multicast to broadcast, is use FreePBX - dial a number from select phones around the campus (which is controlled by FreePBX) and send a broadcast.

I'll include details on our setup below. But our issue: When we dial the FreePBX configured extension, the page goes out... including the phone we're calling from. We wanted all phones to play the broadcast, regardless of what's going on. DND and being currently on a call should not block these broadcasts. But being the one that called the extension to make an emergency announcement should.

One solution would be to make certain phones not participate in the multicast, but we'd like the call to go to every available (as in, on) phone in the case of an emergency.

* The T46S (which will be the bulk of our phones) use FW 66.83.0.10.
* Broadcast 224.0.36.X:XXXXX
* PBXact 14.0.2.14
** Paging and Intercom 13.0.26.5
* Asterisk 13.19.1

I believe when we looked at Paging Pro, their was a limit to how many phones one could page to at a time.

Any ideas? The key things are to be able to broadcast to all phones or just certain buildings and have some control over which phones we can broadcast from. Multicast makes sense, but we need the broadcaster to be able to talk, and not have their phone just listening to the multicast. =)

-Mike
04-06-2018 04:58 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
T46S Multicast from FreePBX - Mike742 - 04-06-2018 04:58 PM
RE: T46S Multicast from FreePBX - jolouis - 04-06-2018, 08:11 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  MP56 Multicast Listening cjohnston 3 8,351 02-19-2021 03:24 AM
Last Post: cjohnston
  T46s - Re-registration delay SIP Server 2 TVAdmin 0 4,805 04-15-2020 07:46 PM
Last Post: TVAdmin
  T46S multiple line - on hold issue sprintership 1 7,411 01-07-2020 05:19 PM
Last Post: Yisroel_MongoTEL
  T46S couple line on hold sprintership 2 9,501 11-22-2019 10:56 PM
Last Post: sprintership
  T46S Factory Default OK button does not work dkirk 0 6,324 02-06-2019 02:09 PM
Last Post: dkirk

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication