New Forum system requires email address which you used to apply for your account to replace your original username. Password stays the same.Please see this post for more details
http://forum.yealink.com/forum/showthread.php?tid=40344

Yealink Test Club has been officially launched. Please visit post below to get detail information. Come and join us!
http://forum.yealink.com/forum/announcements.php?aid=18


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Having problems with Auto-Provision since some time.
Author Message
Klaus2 Offline
Junior Member
**

Posts: 1
Joined: Mar 2018
Reputation: 0
Post: #1
Having problems with Auto-Provision since some time.
Since a couple of weeks, our provision does never work anymore. Not with an "Out of box"-phone. Not with phones in the field.

Normally this works with DHCP. So when the phone gets an IP, it will use the .cfg-file.

Now it returns a Decrypt Fail after getting a respons from the provision-server. But out .cfg-files are not encrypted, so this doesn't make sense.

<134>Feb 1 00:03:49 ATP [1007]: ATP <6+info > Upgrade from com.cfg
<134>Feb 1 00:03:49 LIBD[1007]: DCMN<6+info > Connecting yealink.pvs.essers.com:80
<134>Feb 1 00:03:49 LIBD[1007]: DCMN<6+info > Connecting IP = 10.200.101.1, Port = 80
<134>Feb 1 00:03:49 LIBD[1007]: HTTP<6+info > Request Line: GET /BE_Winterslag/y000000000066.cfg HTTP/1.1
<134>Feb 1 00:03:49 LIBD[1007]: HTTP<6+info > Host: yealink.pvs.essers.com
<134>Feb 1 00:03:49 LIBD[1007]: HTTP<6+info > User-Agent: Yealink/66.9.188.1 SIP-T46S 80:5e:c0:04:e4:f7
<134>Feb 1 00:03:49 LIBD[1007]: HTTP<6+info > process response
<133>Feb 1 00:03:49 LIBD[1007]: HTTP<5+notice> response code: 200
<134>Feb 1 00:03:49 LIBD[1007]: HTTP<6+info > Content-Length: 10856
<133>Feb 1 00:03:49 LIBD[1007]: HTTP<5+notice> response process finish!
<133>Feb 1 00:03:49 LIBD[1007]: HTTP<5+notice> recv : 10856 bytes
<134>Feb 1 00:03:49 LIBD[1007]: DCMN<6+info > Connecting yealink.pvs.essers.com:80
<134>Feb 1 00:03:49 LIBD[1007]: DCMN<6+info > Connecting IP = 10.200.101.1, Port = 80
<134>Feb 1 00:03:49 LIBD[1007]: HTTP<6+info > Request Line: GET /BE_Winterslag/y000000000066_Security.enc HTTP/1.1
<134>Feb 1 00:03:49 LIBD[1007]: HTTP<6+info > Host: yealink.pvs.essers.com
<134>Feb 1 00:03:49 LIBD[1007]: HTTP<6+info > User-Agent: Yealink/66.9.188.1 SIP-T46S 80:5e:c0:04:e4:f7
<134>Feb 1 00:03:49 LIBD[1007]: HTTP<6+info > process response
<133>Feb 1 00:03:49 LIBD[1007]: HTTP<5+notice> response code: 404
<134>Feb 1 00:03:49 LIBD[1007]: HTTP<6+info > Content-Length: 1245
<133>Feb 1 00:03:49 LIBD[1007]: HTTP<5+notice> response process finish!
<131>Feb 1 00:03:49 LIBD[1007]: HTTP<3+error > Client error, ret = 404
<131>Feb 1 00:03:49 ATP [1007]: ATP <3+error > http to file failed, code = 404, msg = Unknown Error, retry = 1
<131>Feb 1 00:03:49 ATP [1007]: ATP <3+error > Decrypt file fail

<134>Feb 1 00:03:49 ATP [1007]: ATP <6+info > Upgrade from mac.cfg





An example of one of the logs that did work in the past:

<134>Mar 7 12:11:18 ATP [1056]: ATP <6+info > Upgrade from com.cfg
<134>Mar 7 12:11:18 LIBD[1056]: DCMN<6+info > Connecting yealink.pvs.essers.com:80
<134>Mar 7 12:11:18 GUI [1205,1205]: WEB <6+info > autop now...
<134>Mar 7 12:11:18 GUI [1205,1205]: WEB <6+info > Setting autoProvision has been changed!
<134>Mar 7 12:11:18 LIBD[1056]: DCMN<6+info > Connecting IP = 10.200.101.1, Port = 80
<134>Mar 7 12:11:18 LIBD[1056]: HTTP<6+info > Request Line: GET /BE_Winterslag/y000000000066.cfg HTTP/1.1
<134>Mar 7 12:11:18 LIBD[1056]: HTTP<6+info > Host: yealink.pvs.essers.com
<134>Mar 7 12:11:18 LIBD[1056]: HTTP<6+info > User-Agent: Yealink/66.9.0.25 SIP-T46S 80:5e:c0:00:b5:4a
<134>Mar 7 12:11:18 LIBD[1056]: HTTP<6+info > process response
<133>Mar 7 12:11:18 LIBD[1056]: HTTP<5+notice> response code: 200
<134>Mar 7 12:11:18 LIBD[1056]: HTTP<6+info > Content-Length: 5094
<133>Mar 7 12:11:18 LIBD[1056]: HTTP<5+notice> response process finish!
<133>Mar 7 12:11:18 LIBD[1056]: HTTP<5+notice> recv : 5094 bytes
<134>Mar 7 12:11:18 ATP [1056]: ATP <6+info > need_cmp_md5=1
<134>Mar 7 12:11:18 ATP [1056]: ATP <6+info > cfg md5 same!
<132>Mar 7 12:11:18 ATP [1056]: ATP <4+warnin> error: features.boss_admin_idle_light.enable
<134>Mar 7 12:11:18 ATP [1056]: ATP <6+info > parse item finish
<134>Mar 7 12:11:18 GUI [1428,1428]: ETLL<6+info > mkit_reply return [0], msgReply[0x60d03]: 0. result[0]
<134>Mar 7 12:11:18 ATP [1056]: ATP <6+info > use new libdownload api
<134>Mar 7 12:11:18 ATP [1056]: ATP <6+info > log_type(1), level(6)
<128>Mar 7 12:11:18 FWUP[1056]: ANY <0+emerg > 678.761.032:FWUP log :type=1,time=1,E=3,W=4,N=5,I=6,D=7
<128>Mar 7 12:11:18 FWUP[1056]: ANY <0+emerg > 678.761.404:ANY =6
<128>Mar 7 12:11:18 FWUP[1056]: ANY <0+emerg > 678.761.672:libfwup build:4.0.0.1-release(Sep 26 2016,15:16:18).
<132>Mar 7 12:11:18 FWUP[1056]: DEV <4+warnin> 678.761.962:device already identify
04-06-2018 07:53 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
Having problems with Auto-Provision since some time. - Klaus2 - 04-06-2018 07:53 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication