[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Button with led configuration
Author Message
Beachnuttz Offline
Junior Member
**

Posts: 6
Joined: May 2021
Reputation: 0
Post: #3
RE: Button with led configuration
(03-19-2018 09:54 AM)Lucia_Yealink Wrote:  
(03-13-2018 02:06 PM)Wesley666 Wrote:  Hello guys,

I have a customer who would like to use a button on his yealink to configure his dial plan on our platform. Basically an "open" and an "closed" button. When one of the buttons is pressed they want the led next to the button to be active so they know which dialplan is active.

The button itself to configure the dialplan on our platform is not problem, see underneath:
linekey.1.type = 13
linekey.1.line = 1
linekey.1.value = 915
linekey.1.label = Open
linekey.1.extension = <6>1<3>2

The problem with this is that I can't configure the led within a marco, you need a BLF or a BLF list key for that. So I have to change the entire key to a BLF with the same values and a macro to keep the led alive.

I have tried to read the Using Enhanced DSS Keys document and use the cfgGeneratorTool but i'm having trouble with this, so far i've got:

features.enchanced_dss_keys.enable = 1
edk.edklist.4.enable = 1
edk.edklist.4.mname = aan
edk.edklist.4.action = 915$Cp2$2$Cp2$2$$LEDg&Lon$


But it's not working.
Basically what i want is
1 button named "on" when pressed dials 915 and send the following code "wait 2 sec, select option 2, wait 2 seconds, select option 1" keep the led active

1 button named "off" when pressed dials 915 and send the following code "wait 2 sec, select option 2, wait 2 seconds, select option 2" keep the led active

I hope you guys can help me out.

HI Wesley,

Yes, I can know your scenario.
For your problem, you should only note one thing, that is how to let the LED active. To let the LED active, you can use the XML broswer feature to control if the LED on the key is on or off. Below is an xml template:
<?xml version="1.0" encoding="ISO-8859-1"?>
<YealinkIPPhoneExecute
Beep="yes">

<ExecuteItem URI="Led:LINE1=on"/>
<ExecuteItem URI="Led:LINE2=off"/>
</YealinkIPPhoneExecute>


Please note, it need two keys to achieve this feature. Take on as example:

There is one key for XML to control the LED active. Such as configure the line key 5 as XML key.
Another key for the EDK key, configure the EDK action, just change the part for the LED as press the line key 5 to let the LED active will be OK.

For more information about how the XML broswer feature work, please refer to the guide:
http://download.support.yealink.com/down...V83_10.pdf

Hope it can solve your problem.

Best Regards,
Lucia


Hello,

I am having a similar situation on T43U
Customer wants line key when pressed sends signal *93*1*1 to the server and the light to glow green when on. Then when pressed again it would glow green.

The server is sending the signal back to their (WILDIX) phones but Yealink it not picking it up. We can send the syslog if needed.

I tried programming a custom key with EDK code
features.enhanced_dss_keys.enable = 1
features.blf_led_mode=1
edk.edklist.1.enable = 1
edk.edklist.1.mname = SWITCH1
edk.edklist.1.action = $LEDr&LFWD AMS$*93*4*1

linekey.5.label=FWD AMS
linekey.5.type=73
linekey.5.value=!SWITCH1

This will turn on the switch on the server but no lights.

Can we program a BLF key to follow EDK rules?
(This post was last modified: 01-27-2022 05:28 AM by Beachnuttz.)
01-27-2022 05:28 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
Button with led configuration - Wesley666 - 03-13-2018, 02:06 PM
RE: Button with led configuration - Beachnuttz - 01-27-2022 05:28 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Configuration Generator Tool Abzorb 1 2,031 12-05-2023 08:28 PM
Last Post: ATICT
  Disable or override transfer soft button rbohac 1 2,559 07-11-2022 10:26 PM
Last Post: rbohac
  Read specific variable from phone configuration saivo 0 3,451 06-13-2021 05:23 PM
Last Post: saivo
  Proxy configuration Laurentt 2 9,480 01-07-2020 12:25 PM
Last Post: Laurentt
  Detailed boot process and ways to add local configuration? DanH 2 7,332 10-16-2019 04:24 PM
Last Post: justingoldberg
  Common Configuration Filenames Rus 3 11,686 06-27-2019 12:52 AM
Last Post: Evan_Yealink
  LDAP Directory Configuration Issue it_prevent 1 6,566 05-15-2019 05:55 AM
Last Post: Mike_Yealink
  BIN vs CFG configuration export/import Mauro 2 9,212 01-31-2019 09:15 AM
Last Post: Mauro
  DSS button label sehiker 2 7,474 08-09-2018 07:19 AM
Last Post: sehiker
  T46 message button programming for comedian mail Tom831 1 7,037 03-06-2018 05:50 AM
Last Post: Tom831

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication