New Forum system requires email address which you used to apply for your account to replace your original username. Password stays the same.Please see this post for more details
http://forum.yealink.com/forum/showthread.php?tid=40344

Yealink Test Club has been officially launched. Please visit post below to get detail information. Come and join us!
http://forum.yealink.com/forum/announcements.php?aid=18

We just had the YMCS online and we are also working on the features plan on the future versions, in this regard we are need to hear your voice about the YMCS.
Please visit : http://forum.yealink.com/forum/showthread.php?tid=42322


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Button with led configuration
Author Message
Wesley666 Offline
Junior Member
**

Posts: 1
Joined: Mar 2018
Reputation: 0
Post: #1
Button with led configuration
Hello guys,

I have a customer who would like to use a button on his yealink to configure his dial plan on our platform. Basically an "open" and an "closed" button. When one of the buttons is pressed they want the led next to the button to be active so they know which dialplan is active.

The button itself to configure the dialplan on our platform is not problem, see underneath:
linekey.1.type = 13
linekey.1.line = 1
linekey.1.value = 915
linekey.1.label = Open
linekey.1.extension = <6>1<3>2

The problem with this is that I can't configure the led within a marco, you need a BLF or a BLF list key for that. So I have to change the entire key to a BLF with the same values and a macro to keep the led alive.

I have tried to read the Using Enhanced DSS Keys document and use the cfgGeneratorTool but i'm having trouble with this, so far i've got:

features.enchanced_dss_keys.enable = 1
edk.edklist.4.enable = 1
edk.edklist.4.mname = aan
edk.edklist.4.action = 915$Cp2$2$Cp2$2$$LEDg&Lon$


But it's not working.
Basically what i want is
1 button named "on" when pressed dials 915 and send the following code "wait 2 sec, select option 2, wait 2 seconds, select option 1" keep the led active

1 button named "off" when pressed dials 915 and send the following code "wait 2 sec, select option 2, wait 2 seconds, select option 2" keep the led active

I hope you guys can help me out.
03-13-2018 02:06 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
Button with led configuration - Wesley666 - 03-13-2018 02:06 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Common Configuration Filenames Rus 3 2,217 06-27-2019 12:52 AM
Last Post: Evan_Yealink
  LDAP Directory Configuration Issue it_prevent 1 659 05-15-2019 05:55 AM
Last Post: Mike_Yealink
  BIN vs CFG configuration export/import Mauro 2 950 01-31-2019 09:15 AM
Last Post: Mauro
  DSS button label sehiker 2 1,128 08-09-2018 07:19 AM
Last Post: sehiker
  T46 message button programming for comedian mail Tom831 1 1,241 03-06-2018 05:50 AM
Last Post: Tom831
  Export CFG configuration file Issue Fraukas2 0 2,133 11-08-2017 06:19 PM
Last Post: Fraukas2
  T27G Reset By OK Button yehuda400 2 3,867 09-27-2017 03:21 PM
Last Post: LeafJ
  Configuration Generator Tool telepathinc 16 22,715 09-15-2017 02:50 PM
Last Post: Sardar
  Password parameter in configuration file asenthil 1 2,919 10-21-2016 08:29 AM
Last Post: Quinlan_Yealink
  Hold/Bridge Configuration ESGIG 8 9,858 07-07-2016 05:38 PM
Last Post: jmoore

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication