New Forum system requires email address which you used to apply for your account to replace your original username. Password stays the same.Please see this post for more details
http://forum.yealink.com/forum/showthread.php?tid=40344

Yealink Test Club has been officially launched. Please visit post below to get detail information. Come and join us!
http://forum.yealink.com/forum/announcements.php?aid=18

We just had the YMCS online and we are also working on the features plan on the future versions, in this regard we are need to hear your voice about the YMCS.
Please visit : http://forum.yealink.com/forum/showthread.php?tid=42322


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T46 message button programming for comedian mail
Author Message
Tom831 Offline
Junior Member
**

Posts: 7
Joined: Sep 2017
Reputation: 0
Post: #1
T46 message button programming for comedian mail
Our phone setup requires T46 users to enter a comedian mail mailbox number and password after touching the T46 message button.

I found where to program the message button in the phone Web interface.

From the documentation, I created a command to dial voice mail, pause, dial mailbox number, pause, and enter the password.

*124$Tinvite$$Cwc$$Cp4$9745$Cp2$1234#Tdtmf$

When I set this in the phone configuration and press the message button on the T46, I get a message that says, "Using secondary trunk to terminate your call."

I reduced the command string to: *124$Cp4$7091$Cp2$1234#Tdtmf$

Still get the same message.

I tried programming a DSS button and got the same result.

Further reading indicates that this function has to be provisioned in order for these strings to work:
features.enhanced_dss_keys.enable = 1

Is this correct?

Any thoughts?

Thanks.

Tom
(This post was last modified: 03-06-2018 05:43 AM by Tom831.)
03-02-2018 06:05 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
T46 message button programming for comedian mail - Tom831 - 03-02-2018 06:05 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  DSS button label sehiker 2 1,104 08-09-2018 07:19 AM
Last Post: sehiker
  Yealink T48S displays message "No service" David K L 1 2,029 04-17-2018 03:39 AM
Last Post: Paul_Yealink
  Button with led configuration Wesley666 1 1,387 03-19-2018 09:54 AM
Last Post: Lucia_Yealink
  T27G Reset By OK Button yehuda400 2 3,848 09-27-2017 03:21 PM
Last Post: LeafJ
  Possible NOT to turn backlight on on XML message GeorgSchwarz 1 2,404 11-19-2015 11:44 PM
Last Post: MRS
  Voice Mail Setup KYPhones 2 4,824 11-03-2015 03:30 AM
Last Post: KYPhones
  Redial button Action URL dmark 2 3,092 09-02-2015 04:34 PM
Last Post: dmark
  One Button Parking rkellogg 4 4,317 06-02-2015 07:25 AM
Last Post: rkellogg
  Voice mail Fangas 3 4,085 05-18-2015 04:30 AM
Last Post: ModCraig
  Programming BLFs T48 & 3CX ShawnDev 5 3,541 12-30-2014 05:34 AM
Last Post: ModCraig

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication