[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Paging to W60B from 3cx extension
Author Message
Travis_Yealink Offline
Super Moderator
******

Posts: 171
Joined: Mar 2016
Reputation: 1
Post: #2
RE: Paging to W60B from 3cx extension
(03-09-2018 02:02 AM)Infotec Wrote:  I have W60B (77.81.0.30) DECT base with 3 W56H (61.81.0.30) handsets

Datasheet has following features listed: Paging, intercom, auto answer

3CX manual "How to configure Yealink W52P/H, W56P/H, W60P for 3CX" has one of the Known Limitation - "Cannot be configured for multicast paging"

I can originate paging call from any phone to other nonDECT Yealink phones, but all DECT phones just continue ringing.

Group rights for DECT phones the same and has Intercom enabled. "Auto Answer" set on in handset settings.

Similar topic for older W52P handset was successfully resolved by "new firmware;.


Hi dear customer,

From Yealink side, multicast paging feature is workable by default, I checked our internal database, and I didn't find the related information, please tell me what's the new firmware of W52P which fixed the problem.
Or you could also reproduce the issue, and send me the trace files:
a. Level 6 syslog
b. PCAP trace
c. Config.bin
You can get the guide from this link to see how to export the issue data(trace files):
http://support.yealink.com/faq/faqInfo?id=707

Best Regards,
Yealink_Support
03-13-2018 06:41 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Paging to W60B from 3cx extension - Travis_Yealink - 03-13-2018 06:41 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  How to enable web server/ GUI on W60B and W70B after provisioning has disabled it. jhofford 2 1,782 09-12-2023 08:42 PM
Last Post: jhofford
  Problems setting up W60B and interface issues Ness 4 4,545 03-30-2023 05:24 PM
Last Post: Ness
  Auto Provision firmware on W60B base station hospitale 6 5,337 02-15-2023 05:54 PM
Last Post: hospitale
  recovery mode W60B files Aleskey 3 5,066 02-14-2023 01:42 AM
Last Post: 88fingerslukee
  W60B Constantly Restarts When W73H Is Connected. nolto 0 1,432 02-07-2023 12:15 AM
Last Post: nolto
  W60B factory reset and default login carsey 3 4,959 02-01-2023 02:52 AM
Last Post: complex1
  W60B remove intercom when transfert MYCOMPUTING 2 2,411 12-08-2022 12:17 AM
Last Post: complex1
  W60B base With 56H ( incomming calls, no ringing when charging ) stéphane 3 8,469 12-01-2022 03:15 AM
Last Post: therring
  W60B emitting high-pitched noise msncookie 6 11,440 09-19-2022 08:39 PM
Last Post: RobFromSouthJersey
  ‘New’ W56/W60B default admin password not recognised? Russ1 2 6,009 08-07-2022 02:44 PM
Last Post: Russ1

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication