[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 1 Votes - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Different Local SIP port for each SIP account on W60P
Author Message
Elaine_Yealink Offline
Super Moderator
******

Posts: 152
Joined: Aug 2014
Reputation: 4
Post: #3
RE: Different Local SIP port for each SIP account on W60P
Hi SPC Support,

Answers to your question below:
1) Why Yealink has changed it?
The reason is that new machnism is following SIP standard.
2) Was there a demand from any market or any wrong behavior of previous mechanism has driven Yealink to take this step?
Some of the customers reported registration failed issue when PBX asked for a fixed registration port.
3)Is there any solution on the roadmap? Like something that do Grandstream phones as it is described below?
So far, we don't have roadmap to change this machenism.

So we'd better focus on the issue that you get from customer to see if it is caused by the fixed SIP port. I am sorry but confused with the description above. Please help to confirm:
1. The mentioned post is about registration failed issue. But I think in your case, the accounts can be registered successfully?
2. If not, what is the error for the failed registration? Please provide pcap and syslog for this.
3. What do you mean by this? The problem is cannot make calls between handsets registered to same base? Or it is the different process of transfer operation? Please explain clearly:
"The possible solution to this issue is the use of intercom. This solution is acceptable when the internal calls to SIP extensions are only between the Handsets registered to a same base. If the user wants to make a call to a handset registered in another base or another desk phone, the process for call transfer will be different. It means that in an office with some Dect phones and Desk phones, the attended call trasfer process between Dect phones to Dect phones (of same base) and Dect phones to any other phone will be different. Which is not accepted by the customer."

Regards
Elaine
03-05-2018 05:52 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Different Local SIP port for each SIP account on W60P - Elaine_Yealink - 03-05-2018 05:52 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  W70B show account password. fullbore 0 2,906 04-05-2023 04:57 PM
Last Post: fullbore
  W60P (and also W76P) unable to get IP address francsalazar 0 2,747 08-16-2022 07:16 AM
Last Post: francsalazar
  yealink w60p data initializing (W56H) gijoe 4 16,247 01-26-2022 06:17 PM
Last Post: complex1
  W60P Key Lock Issues Pettis 1 4,042 01-20-2022 08:55 PM
Last Post: complex1
  Assign Multiple Listen (Local) Ports mmarshall 1 4,771 09-30-2021 03:21 AM
Last Post: complex1
  W60P remote control DaveBoulden 3 9,754 10-14-2020 12:59 PM
Last Post: complex1
  Power of signal W60P pascal mear 1 6,049 08-05-2020 02:24 PM
Last Post: complex1
  Account re-registration at W60B freezes foxxp 0 4,644 02-20-2020 04:28 AM
Last Post: foxxp
  [SOLVED] DECT dongle DD10K - bad performance in combination to T41S + W60P Babylonia 4 12,125 10-02-2019 10:02 PM
Last Post: Babylonia
  W60B DECT can't dial 911, using wrong port c.holloway 4 13,346 04-26-2019 02:39 PM
Last Post: c.holloway

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication