[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Yealink T46G/S power saving mode on 66.82.0.20 firmware
Author Message
kristof.daylesford Offline
Junior Member
**

Posts: 2
Joined: Feb 2018
Reputation: 0
Post: #3
RE: Yealink T46G/S power saving mode on 66.82.0.20 firmware
(02-17-2018 10:15 AM)complex1 Wrote:  Hi,

Please use 3CX SP3 and the latest template.
This template solve the power LED blink “issue” and other misconfigured settings, but not all parameters are used to provision the phone.
A few settings must be made manually. Also make sure the extension is set-up correctly in 3CX, like “Choose how to configure Power LED notifications”, “Backlight Timeout” and “Screensaver Timeout”

Hope this will help.

Hi complex1,
Thank you for your reply.
Our 3CX is on the version 15.5.8801.3 and we're using the latest templates.
I discovered the setting "features.power_saving.enable" causes that behaviour. If set to 0 screen goes black after 10 min after reboot when phone is not interacted with.
If the setting is 1 - screen doesn't go black after reboot.

I wanted to phone to never go to power save mode that's why I disabled that option. I guess I'll have to leave it enabled and play with idle times and office hours settings instead.

Code:
################################################################################​#######
##                                    power_saving                                   ##          
################################################################################​#######
features.power_saving.enable = 1
features.power_saving.office_hour.idle_timeout =
features.power_saving.off_hour.idle_timeout =
features.power_saving.user_input_ext.idle_timeout=
features.power_saving.office_hour.monday =
features.power_saving.office_hour.tuesday =
features.power_saving.office_hour.wednesday =
features.power_saving.office_hour.thursday =
features.power_saving.office_hour.friday  =
features.power_saving.office_hour.saturday  =
features.power_saving.office_hour.sunday =
features.power_saving.power_led_flash.on_time = 0
features.power_saving.power_led_flash.off_time = 3000
phone_setting.common_power_led_enable= 0

################################################################################​#######
##                                    screensaver                                    ##          
################################################################################​#######
screensaver.wait_time= 21600
screensaver.picture_change_interval=
screensaver.clock_move_interval=
screensaver.display_clock_on_upload_picture.enable = 0
screensaver.display_clock.enable = 1
{IF ua=SIP-T29G,SIP-T46S,SIP-T46G,SIP-T48S,SIP-T48G,SIP-T52S,SIP-T54S}
{ELSE}
phone_setting.lcd_logo.wait_time= %%scrsavertime%%
phone_setting.lcd_logo.show_time= 3
{ENDIF}

BTW
the extension provisioning settings you've mentioned are as follows:
- chose how to configure power LED notifications: both (works OK)
- backlight timeout: 30 sec (overridden by template's 2mins)
- screensaver timeout: 30 sec (this gets overridden by template's 6h)
02-20-2018 02:49 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Yealink T46G/S power saving mode on 66.82.0.20 firmware - kristof.daylesford - 02-20-2018 02:49 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Yealink T48s Firmware update failed dangmoss 2 2,264 02-19-2022 03:09 AM
Last Post: dangmoss
  Problem Change Firmware T48s from SFB to SIP Lars Maschke 2 2,476 01-14-2022 10:22 AM
Last Post: kumagera
  Yealink T42S and T42G Phone stuck at Welcome Pierre06 7 4,368 01-10-2022 11:36 PM
Last Post: Pierre06
  Yealink T42G Phone stuck at Welcome LFC 8 19,207 11-18-2021 11:20 PM
Last Post: Pierre06
  NAP over Yealink T46 - not working Bernhard77 0 1,306 11-16-2021 09:15 PM
Last Post: Bernhard77
  SIP account on the Yealink T46U suddenly Not Registered kmsfn 0 1,314 10-26-2021 04:44 PM
Last Post: kmsfn
  Yealink, provisioning and Sophos firewall UCUC 4 3,809 10-07-2021 10:06 PM
Last Post: complex1
  Feature Request T46G - Return to page 1 imfloridaguy 4 8,427 08-30-2021 12:34 AM
Last Post: eric@hudsonvalleygeek.com
  T41P Yealink phone wants to talk to the Verizon mother ship nestman 1 2,959 06-14-2021 05:00 PM
Last Post: complex1
  T46G with EXP40 Sidecars Programming Burl 0 2,005 05-27-2021 11:35 PM
Last Post: Burl

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication