New Forum system requires email address which you used to apply for your account to replace your original username. Password stays the same.Please see this post for more details
http://forum.yealink.com/forum/showthread.php?tid=40344

Yealink Test Club has been officially launched. Please visit post below to get detail information. Come and join us!
http://forum.yealink.com/forum/announcements.php?aid=18

We just had the YMCS online and we are also working on the features plan on the future versions, in this regard we are need to hear your voice about the YMCS.
Please visit : http://forum.yealink.com/forum/showthread.php?tid=42322


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T46G Call Fwd DSS Key enables / disables ALL fwd types
Author Message
Aishion_Yealink Offline
Administrator
*******

Posts: 116
Joined: Mar 2017
Reputation: 1
Post: #5
RE: T46G Call Fwd DSS Key enables / disables ALL fwd types
(02-06-2018 03:46 AM)MintTelecom Wrote:  
(02-06-2018 03:30 AM)Aishion_Yealink Wrote:  Dear customer,

I just test on my side with latest firmware:28.82.0.20, and found that this firmware works normally, and you will only have Always forward options when you configure through this way, example as below:

You set a forward key and set a value as a forward number, then you save the configure, once you press the key, the phone will automatically enable/disabled Always forward, you don't need to choose which type you want to configure.

So would you please kindly try to download below latest firmware and test again?

http://download.support.yealink.com/down...2.0.30.rom

Any question, please feel free to contact us.

Best Regards

Aishion

Hi Aishion,

Can you please confirm which lines you're populating in the config and with what values?

When you enable a forward key, it does enable and disable the Always Forward setting, but it also enables and disables the Busy and No Answer settings, which I don't want to change - I want them to remain on always.

Dear customer,

Yes, I check on my Web UI and only Always forward enabled, may I know which firmware are your phone running? Or you can kindly upgrade to the latest firmware and test again.

Any question, please feel free to contact us.

Best Regards

Aishion
02-06-2018 05:28 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: T46G Call Fwd DSS Key enables / disables ALL fwd types - Aishion_Yealink - 02-06-2018 05:28 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T46G - Disable Line Key Configuration ? timalex 13 15,053 04-12-2019 09:23 AM
Last Post: Johnny88
  BLF and Call Park on T29G pureit 0 195 04-02-2019 01:36 AM
Last Post: pureit
  W56H- Remove Missed call list plainlanddental 5 1,694 01-02-2019 12:47 PM
Last Post: complex1
  T29G Remote Phonebook no lookup for incoming call Chris708 1 1,754 07-16-2018 03:15 PM
Last Post: Chris708
  t46g: intercom over speaker rather than headset? asinshesq 22 29,454 01-24-2018 10:02 PM
Last Post: mikes
  Duplicate Missed Call Enties on T38G koolkenh 2 3,862 11-03-2017 09:02 PM
Last Post: Ret
  T46G 28.82.0.2.0 -- BUG Tyler 1 1,563 09-29-2017 05:58 AM
Last Post: Lucia_Yealink
  T52S on call DSS key display too short tima 3 2,428 08-22-2017 01:13 AM
Last Post: Aishion_Yealink
  T38G Continues to ring after outbound call connects srcurtis 6 4,649 06-14-2017 09:51 AM
Last Post: Kevin_Yealink
  T46G - Display IP Cam Picture or MJPG Video Stream via DSS Key smartpc 10 10,348 04-14-2017 11:46 AM
Last Post: MohammedTahir

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication