(01-31-2018 03:12 PM)c99hris Wrote: Per the administrator guide
features.dnd.allow if set to 0 is Disabled, DND cannot be activated
so should this not be set to 1 enabled?
These settings are in my config that I send to the phone however are missing from the cfg when I retrieve it from the phone?
features.dnd_mode
feature.dnd_refuse_code
features.dnd.allow
Dear customer,
Please kindly see my answers as below:
Per the administrator guide
features.dnd.allow if set to 0 is Disabled, DND cannot be activated
so should this not be set to 1 enabled?
[Aishion]:
Sorry that I miss this parameter, for this parameter, yes you can kindly set to 0 or 1, but I need to explain to you that when you set to 1(factory setting), you can't retrieve this in the cfg file, it's design by this.
These settings are in my config that I send to the phone however are missing from the cfg when I retrieve it from the phone?
features.dnd_mode
feature.dnd_refuse_code
features.dnd.allow
[Aishion]:
1/ For "features.dnd_mode":
If you set this parameter to 0, you can't retrieve this in the cfg file, because you can't retrieve factory settings in the cfg file, it's design by this, but you can kindly check in the web UI, please go:
Features->Forward&DND->DND->Mode
2/ For "features.dnd_refuse_code"
If you set this parameter to 480, you can't retrieve this in the cfg file, because you can't retrieve factory settings in the cfg file, it's design by this, but you can kindly check in the web UI, please go:
Features->General Information->Return Code When DND
3/ For "features.dnd.allow"
If you set this parameter to 480, you can't retrieve this in the cfg file, because you can't retrieve factory settings in the cfg file, it's design by this.
To sum up, you can only retrieve parameter in cfg file if you changing it different from factory setting, because it's design by this.
Any question, please feel free to contact us.
Best Regards
Aishion