(01-26-2018 05:01 PM)c99hris Wrote: Is there a way to get the BLF key to show that another extension has their DND button activated?
I have tried these on the T46S using 66.82.0.30 firmware where these settings will not stick in the phone when I upload the config from my provisioning server. I did check the file and they are present. I download the config of the phone and they are not there nor does the DND status notification to my server work due to the settings not sticking
These wont stick:
features.dnd.allow=”1”
features.feature_key_sync.enable=”1”
features.dnd.feature_key_sync.enable=”1”
features.dnd_mode=”0”
features.dnd_refuse_code=”480”
Dear customer,
This is Aishion from Yealink technical team, nice to know you. My pleasure to work for you!
Sorry to tell you that Yealink Phone is only for monitor idle status, ringing status, or in a call status, can’t monitor the DND status at present.
To solve this issue, I believe that the best way is connect your sip server for help to make sure that when phone is set to DND, then the Notify message that server send to phone side should contain the correct state. State are all showing below:
terminated means idle
confirmed means busy
early means ringing
proceeding means ringing
So the best way is the notify send from server to phone containing the state of "confirmed", then DND feature can be seen as a busy state of the phone.
Can this solution meet your requirement? If not, would you please share us is there any project for this features? How many phones in the project?
Any question, please feel free to contact us.
Best Regards
Aishion