Dear Customer, Good day!
For W60B+V81 firmware, please use below parameters:
account.X.dnd.enable=
Description:
Triggers DND feature to on or off for account X.
0-Off
1-On
If it is set to 1 (On), the DECT IP phone will reject incoming calls on account X.
Web User Interface:
Features->Forward&DND->DND->DND Status
Handset User Interface:
OK->Call Features->Do Not Disturb->LineX->Status
account.X.dnd.on_code=
Description:
Configures the DND on code to activate the server-side DND feature for account X.
The DECT IP phone will send the DND on code to the server when you activate DND feature for account X on the DECT IP phone.
account.X.dnd.off_code=
Description:
Configures the DND off code to deactivate the server-side DND feature for account X. The DECT IP phone will send the DND off code to the server when you deactivate DND feature for account X on the DECT IP phone
For more information, please refer to the admin guide of W60B DECT(on the page 227), below is the download link:
http://download.support.yealink.com/down...V81_10.pdf
By the way:
Dear Yealink customer,
Please raise your issue or question in our professional ticket system (
https://ticket.yealink.com) to get a quick response.
How to Get Your Ticket Account?
•Please follow this guide
http://support.yealink.com/faq/faqInfo?id=678 to register your ticket account.
•Any problem on registration please contact support@yealink.com
How to use Yealink Ticket System?
• Please follow Yealink Ticket Quick Guide:
http://support.yealink.com/faq/faqInfo?id=703
Enjoy Yealink Ticket Service!
Best Regards,
Evan You