T46G/S Multicast on PC Port Issue

[Elaine_Yealink]

Hi there,

The latest version fixes this issue by adding parameters to steam control. Please upgrade to this version and test:
http://sfyms.yealink.com/?ShareToken=02C...4943DA6FC4

This parameter configures the protecting mode for Ethernet port. Value ranges from 0-4;
network.storm_filtering_mode = 2

These parameters configures the speed of Lan/wan/mii port. Value ranges from 1-3 reflecting to 10M/100M/1000M.
network.storm_filtering.lan_speed = 2
network.storm_filtering.wan_speed = 2
network.storm_filtering.mii_speed = 2

These parameters configures protecting level Ethernet port. Value ranges from 1-5. Level goes stronger as value raise up.
network.storm_filtering.lan_bsp_level = 4
network.storm_filtering.wan_bsp_level = 4
network.storm_filtering.mii_bsp_level = 4

The values above are default values on the latest firmware. If upgrading firmware does not fix your issue, please try reduce the parameters.

Regards
Elaine