New Forum system requires email address which you used to apply for your account to replace your original username. Password stays the same.Please see this post for more details
http://forum.yealink.com/forum/showthread.php?tid=40344

Yealink Test Club has been officially launched. Please visit post below to get detail information. Come and join us!
http://forum.yealink.com/forum/announcements.php?aid=18

We just had the YMCS online and we are also working on the features plan on the future versions, in this regard we are need to hear your voice about the YMCS.
Please visit : http://forum.yealink.com/forum/showthread.php?tid=42322


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Auto Provision after firmware update
Author Message
nickmancini Offline
Junior Member
**

Posts: 2
Joined: Oct 2014
Reputation: 0
Post: #1
Auto Provision after firmware update
Greetings everyone.

I have about 750 T41 phones using a wide range of firmware. I need to get all phones' firmware updated in order to perform an upcoming PBX upgrade.

I'm able to successfully perform the firmware upgrade by changing option-66 from the standard provisioning string, to to a firmware server, which has a y000000000036.cfg file, which contains the URL of the .rom file. (i.e., firmware.url = http://xxx.xxx.xxx.xxx/fw/T41-36.80.0.95.rom"

This part works great! If a phone was provisioned, it keeps it's config after the firmware update, and all is well.

What I am unable to do is have unprovisioned phones auto-provision after the firmware update is complete.

Unprovisioned (or factory reset) phones stop after they download & install the firmware.

I was advised to add the line:

"auto_provision.server.url = http://xxx.xxx.xxx.xxx/standard_prov_string"

which is the standard auto-provisioning string I normally use in option-66.

This results in the phones' GUI showing the proper provisioning url in the "Server URL" field, but, nothing happens.

Further, clicking "autoprovision now" or rebooting the phone does not work either.

The only way, so far, to have the phones provision after the firmware update is to change option-66 back to the provisioning string, and bounce the phone.

Any ideas on how to accomplish this without having to change option-66 back & forth?

Thanks!
12-28-2017 06:29 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
Auto Provision after firmware update - nickmancini - 12-28-2017 06:29 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Factory Reset via Provision Andrews1 3 1,073 07-02-2019 03:09 PM
Last Post: Fraukas2
  Auto provisioning seams to be (partly) broken in version 83 for T46G HaraldL 2 1,534 07-02-2019 03:04 PM
Last Post: Fraukas2
  Can't Call Forward Yealink T21P e2 - latest firmware Grace6641 1 431 06-18-2019 09:53 AM
Last Post: Walter_Yealink
Lightbulb Auto provision firmware ... Yuriy Y. 1 816 04-26-2019 05:40 AM
Last Post: Yuriy Y.
  T22P always auto restart jamess2007 2 946 03-13-2019 11:49 AM
Last Post: Langveldt
  Firewall Settings for Auto Provisioning ChristophWHAT 2 1,368 02-04-2019 12:47 PM
Last Post: ChristophWHAT
  Auto Provisioning Hangs Rus 1 1,216 10-17-2018 11:06 AM
Last Post: Rus
  Auto provisioning file names shane.caznet 1 1,491 10-12-2018 02:56 PM
Last Post: jolouis
  firmware.url or static.firmware.url Eastern Oregon Net, Inc. 1 1,371 10-05-2018 05:55 AM
Last Post: NI
  Auto-Provision Firmware Rus 0 1,081 08-24-2018 11:07 AM
Last Post: Rus

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication