Log in

***Evan_Yealink*** · 12-26-2017 06:46 AM

Dear Customer,

Good day!

Sorry to tell you that the speed dial can't be set in the paging list. Multicast paging allows DECT IP phones to send or receive Real-time Transport Protocol (RTP)
streams to/from the pre-configured multicast address(es) on the desired channel without involving SIP signaling.

For Speed dial, please refer to the guide I attached. On the page 46.

By the way:
Please raise your issue or question in our professional ticket system (https://ticket.yealink.com) to get a quick response.

How to Get Your Ticket Account？
•Please follow this guide http://support.yealink.com/faq/faqInfo?id=678 to register your ticket account.
•Any problem on registration please contact support@yealink.com
How to use Yealink Ticket System?
• Please follow Yealink Ticket Quick Guide: http://support.yealink.com/faq/faqInfo?id=703

Enjoy Yealink Ticket Service!

Any question,freely to let us know.
Best Regards,
Evan You

Possibly Related Threads...
Thread:		Author	Replies:	Views:	Last Post
	W52H - Provisioning contacts and speed dials	GIWM	1	6,501	12-22-2017 08:03 AM Last Post: Elaine_Yealink
	T48G Hide dial pad option	brourk	5	15,841	06-17-2016 04:20 PM Last Post: Yealink_Michael
	CP860 - Programmable Key: Speed Dial	tsukraw	0	5,622	02-28-2015 01:38 AM Last Post: tsukraw
	TIME OUT FOR DIAL-NOW: MINIMUM = 1 SECOND	acrz6666	5	22,144	10-13-2014 11:56 AM Last Post: tsukraw
	Setup dial number in phone to use multicast paging	rlsabin	2	11,501	10-17-2013 02:05 AM Last Post: rlsabin
	Second dial tone and dial from phonebook by handset off-hook	xmichald	0	7,249	03-06-2013 08:04 AM Last Post: xmichald
	Speed Dial Code	elementpbx	0	8,064	03-05-2013 08:53 AM Last Post: elementpbx

Threaded Mode \| Linear Mode W52H Speed Dial - Paging
Author	Message