New Forum system requires email address which you used to apply for your account to replace your original username. Password stays the same.Please see this post for more details
http://forum.yealink.com/forum/showthread.php?tid=40344

Yealink Test Club has been officially launched. Please visit post below to get detail information. Come and join us!
http://forum.yealink.com/forum/announcements.php?aid=18

We just had the YMCS online and we are also working on the features plan on the future versions, in this regard we are need to hear your voice about the YMCS.
Please visit : http://forum.yealink.com/forum/showthread.php?tid=42322


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Blank screen and flashing indicator
Author Message
GIWM Offline
Junior Member
**

Posts: 26
Joined: Mar 2017
Reputation: 0
Post: #1
Blank screen and flashing indicator
After upgrading my T46G/S units to X.82.0.20, we've noticed that if they have no activity for a number of hours (like every Monday morning) that the screen is black and the indicator light is flashing. The phone will work just fine and can be 'woken' by interacting with the phone. We use the following settings universally that may apply, but these haven't changed since the X.81.X.X firmware:

features.power_saving.enable = 0
screensaver.wait_time = 30
screensaver.display_clock.enable = 1
screensaver.mode = 0
phone_setting.backlight_time = 30
phone_setting.inactive_backlight_level = 1

It acts like it may be ignoring the Power Saving setting and assuming it's enabled.

Thoughts?

I have confirmed that this is a bug in the X.82.0.20 firmware. The setting for features.power_saving.enable is being ignored.

I can replicate this quickly by changing all three Idle timeouts to 1 minute and leaving Power Saving set to Disabled. The phone will go into power saving one minute after hitting confirm.
(This post was last modified: 12-18-2017 08:52 PM by GIWM.)
12-18-2017 08:14 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
Blank screen and flashing indicator - GIWM - 12-18-2017 08:14 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T46S Screen Timeout jferguso 3 176 10-10-2019 06:35 PM
Last Post: complex1
  Shortcut to "View Voice Mail" Screen joshua@itstel.com 1 318 07-26-2019 04:00 PM
Last Post: Baron_Yealink
  Scrambled screen on T48G SimpleCom 0 637 11-30-2018 05:07 PM
Last Post: SimpleCom
  Hide phones # on screen kcurtis 0 528 11-29-2018 09:00 PM
Last Post: kcurtis
  T46G: Power LED always flashing when backlight is off Artabanos 125 129,766 10-15-2018 03:55 PM
Last Post: Who
  T41S screen blinking Prozper 2 1,068 08-19-2018 07:29 PM
Last Post: Prozper
  Formatted Text Screen allow DTMF on call GNIL 0 656 08-09-2018 04:16 PM
Last Post: GNIL
  black screen logiqit 5 3,309 07-25-2018 09:03 AM
Last Post: complex1
  T46S Idle Screen - lots of blanks on 3 pages ghires 0 822 06-20-2018 12:50 PM
Last Post: ghires
  T48G Blank white Screen MH 2 1,702 05-31-2018 06:50 PM
Last Post: MH

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication