Yealink 28.82.0.20

[Garan]

(08-29-2018 04:06 PM)Garan Wrote:  More details here:

https://www.3cx.com/community/threads/pa...ost-246560

Problem still exists, I have narrowed it down to the following settings that are being applied despite either not being specified at all, or being specified to another value in my provisioning file. This seems to be the culprit but I can find no cause for this. Very annoying.

features.call_park.park_mode = 0
bw.enable = 1

Fixed.

The following was set in my provisioning file, not sure for what reason exactly. But it must require bw.enable =1 as a dependency and automatically set it, which as I understand then limits you to FAC only on park mode:

bw.directory_enable = 1

I set it to 0 and it is working correctly.

Hopefully this helps someone else.