New Forum system requires email address which you used to apply for your account to replace your original username. Password stays the same.Please see this post for more details
http://forum.yealink.com/forum/showthread.php?tid=40344


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
WireGuard VPN
Author Message
mkeuter Offline
Asterisk Integrator
***

Posts: 81
Joined: Jul 2013
Reputation: 3
Post: #1
WireGuard VPN
Hi, I am Michael from the AstLinux Project. A Linux-based Asterisk + Router/VPN distribution.

We've recently included the excellent WireGuard VPN into our project and made some tests comparing it with OpenVPN (which we also include).

WireGuard has much faster throughput on the same hardware and lower jitter than OpenVPN.
It is also very lightweight and easy to implement in Linux.
It would be great if Yealink would consider to additionally include Wireguard into their IP phone firmware in the future.
Wireguard is used by professional VPN providers as well.

Here are some OpenVPN/WireGuard comparisons.
For a single phone call (100Kbps) the UDP jitter is the same (but only 16 datagrams in the test)
As the traffic increases, the WireGuard jitter remains much lower than OpenVPN.

Code:
## Jetway
pbx3 ~ # iperf3 -s

## Qotom
# OpenVPN #
pbx ~ # iperf3 -c 10.8.1.2
--
[ ID] Interval           Transfer     Bandwidth       Retr
[  4]   0.00-10.00  sec   132 MBytes   111 Mbits/sec   38             sender
[  4]   0.00-10.00  sec   132 MBytes   111 Mbits/sec                  receiver
--
# WireGuard #
pbx ~ # iperf3 -c 10.4.0.3
--
[ ID] Interval           Transfer     Bandwidth       Retr
[  4]   0.00-10.00  sec   606 MBytes   508 Mbits/sec  1086             sender
[  4]   0.00-10.00  sec   603 MBytes   506 Mbits/sec                  receiver
--

# OpenVPN #
pbx ~ # iperf3 -c 10.8.1.2 -u -b 100K
--
[ ID] Interval           Transfer     Bandwidth       Jitter    Lost/Total Datagrams
[  4]   0.00-10.00  sec   128 KBytes   105 Kbits/sec  0.033 ms  0/16 (0%)  
[  4] Sent 16 datagrams
--
# WireGuard #
pbx ~ # iperf3 -c 10.4.0.3 -u -b 100K
--
[ ID] Interval           Transfer     Bandwidth       Jitter    Lost/Total Datagrams
[  4]   0.00-10.00  sec   128 KBytes   105 Kbits/sec  0.036 ms  0/16 (0%)  
[  4] Sent 16 datagrams
--

# OpenVPN #
pbx ~ # iperf3 -c 10.8.1.2 -u -b 1M
--
[ ID] Interval           Transfer     Bandwidth       Jitter    Lost/Total Datagrams
[  4]   0.00-10.00  sec  1.19 MBytes   996 Kbits/sec  0.258 ms  0/152 (0%)  
[  4] Sent 152 datagrams
--
# WireGuard #
pbx ~ # iperf3 -c 10.4.0.3 -u -b 1M
--
[ ID] Interval           Transfer     Bandwidth       Jitter    Lost/Total Datagrams
[  4]   0.00-10.00  sec  1.19 MBytes   996 Kbits/sec  0.050 ms  0/152 (0%)  
[  4] Sent 152 datagrams
--

# OpenVPN #
pbx ~ # iperf3 -c 10.8.1.2 -u -b 10M
--
[ ID] Interval           Transfer     Bandwidth       Jitter    Lost/Total Datagrams
[  4]   0.00-10.00  sec  11.8 MBytes  9.90 Mbits/sec  0.571 ms  0/1511 (0%)  
[  4] Sent 1511 datagrams
--
# WireGuard #
pbx ~ # iperf3 -c 10.4.0.3 -u -b 10M
--
[ ID] Interval           Transfer     Bandwidth       Jitter    Lost/Total Datagrams
[  4]   0.00-10.00  sec  11.8 MBytes  9.90 Mbits/sec  0.075 ms  0/1511 (0%)  
[  4] Sent 1511 datagrams
--

# OpenVPN #
pbx ~ # iperf3 -c 10.8.1.2 -u -b 100M
--
[ ID] Interval           Transfer     Bandwidth       Jitter    Lost/Total Datagrams
[  4]   0.00-10.00  sec   118 MBytes  99.0 Mbits/sec  0.701 ms  13293/14977 (89%)  
[  4] Sent 14977 datagrams
--
# WireGuard #
pbx ~ # iperf3 -c 10.4.0.3 -u -b 100M
--
[ ID] Interval           Transfer     Bandwidth       Jitter    Lost/Total Datagrams
[  4]   0.00-10.00  sec   118 MBytes  99.1 Mbits/sec  0.098 ms  2995/15099 (20%)  
[  4] Sent 15099 datagrams
--

# OpenVPN #
pbx ~ # iperf3 -c 10.8.1.2 -u -b 500M
--
[ ID] Interval           Transfer     Bandwidth       Jitter    Lost/Total Datagrams
[  4]   0.00-10.00  sec   591 MBytes   496 Mbits/sec  0.728 ms  73173/74925 (98%)  
[  4] Sent 74925 datagrams
--
# WireGuard #
pbx ~ # iperf3 -c 10.4.0.3 -u -b 500M
--
[ ID] Interval           Transfer     Bandwidth       Jitter    Lost/Total Datagrams
[  4]   0.00-10.00  sec   592 MBytes   497 Mbits/sec  0.092 ms  49873/75819 (66%)  
[  4] Sent 75819 datagrams
--

Latency:

# OpenVPN #
pbx ~ # fping -c10 10.8.1.2
--
10.8.1.2 : xmt/rcv/%loss = 10/10/0%, min/avg/max = 0.48/0.52/0.61
--
# WireGuard #
pbx ~ # fping -c10 10.4.0.3
--
10.4.0.3 : xmt/rcv/%loss = 10/10/0%, min/avg/max = 0.34/0.46/0.53
--

PS: If there is any interest, I can also post the exact data for for the test environment.

Michael

http://www.mksolutions.info
(This post was last modified: 11-28-2017 01:44 PM by mkeuter.)
11-26-2017 04:51 PM
Visit this user's website Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
WireGuard VPN - mkeuter - 11-26-2017 04:51 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication