[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Always Forwarding with Firmware 28.82.0.20 is changed
Author Message
Aishion_Yealink Offline
Administrator
*******

Posts: 116
Joined: Mar 2017
Reputation: 1
Post: #6
RE: Always Forwarding with Firmware 28.82.0.20 is changed
(12-13-2017 05:32 AM)Aishion_Yealink Wrote:  
(12-11-2017 04:41 PM)jacobj Wrote:  Hallo Aishion,

thank you for your reply.

It is no problem to activate the forwarding manually with code *8+Number and deactivating with *80.

For forward always in the yealink gui I can not use the off code beacause the phone calls *80+Number after deactivating. Before the last firmwareupdate it just used *80 only.

Regards,
Jacob

Hi Jacob,

Thanks for your prompt reply.

I know your issue well at present. Do you mean you set a Forward Dss key and configure target number in Value filed as well?

I just test on my side on both V81.0.110 and V82.0.20 version, and I found out if I don't set Value filed and left it blank, it will works well.

If I also set Target number on Value filed, it will disable Forward feature normally, so would you please kindly just leave Value fild to blank and test again?

   

   

Or if the issue still exist, could you please kindly help us gather the config.bin file, level 6 syslog and trace that we can debug?About how to get these files, please refer below FAQ:

http://support.yealink.com/faq/faqInfo?id=313

Please also kindly share us how many phones on your side.

If any question, please feel free to contact us.

Best Regards
Aishion
12-14-2017 01:28 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Always Forwarding with Firmware 28.82.0.20 is changed - Aishion_Yealink - 12-14-2017 01:28 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  newest firmware for T4XS units causes bootup loop davedogmoore@gmail.com 0 506 01-21-2024 03:44 PM
Last Post: davedogmoore@gmail.com
  SIP-T46G Need firmware update instructions RobbyK 2 967 01-11-2024 10:52 PM
Last Post: RobbyK
  Firmware T42s Raimundo 1 1,341 11-23-2023 06:45 PM
Last Post: Darsh
  T41S FIRMWARE 66.9.0.80 vers 66.86.0.5 DANJEAN 1 1,797 08-23-2023 01:00 AM
Last Post: complex1
  Yealink SIP-T40P Firmware UnitedTech_Support 1 2,005 05-05-2023 08:07 PM
Last Post: complex1
  T48U Custom Firmware Upgrade to Official Friendly 0 1,921 03-29-2023 01:20 AM
Last Post: Friendly
  Yealink T41S firmware kosif 0 1,942 12-19-2022 08:52 AM
Last Post: kosif
  Yealink T46S Forwarding does not work!! Müller 0 1,348 10-16-2022 03:38 AM
Last Post: Müller
  T42S unable to update firmware brianstoiber 6 7,753 09-30-2022 05:31 PM
Last Post: complex1
  Yealink T48s Firmware update failed dangmoss 2 7,383 02-19-2022 03:09 AM
Last Post: dangmoss

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication