Log in

***Aishion_Yealink*** · 11-09-2017 01:26 AM

(11-03-2017 05:29 AM)jasonblewis Wrote: Hi,

on the T42G phones I can set call park mode to Transfer via the webif. On the T48G I am not given Transfer as an option, only FAC or XSI. is there some way to get the transfer mode of parking calls on the T48G?

thanks in advance

Hi,

I think you are running on Broadsoft firmware which the third number is 193, example 35.81.193.1, am I right?

Can I know are you using Broadsoft PBX? If not, you can kindly upgrade to neutral firmware, you can download the firmware in below link:

T48G: http://download.support.yealink.com/down...2.0.20.rom

Please refer to below FAQ to upgrade the firmware:

http://support.yealink.com/faq/faqInfo?id=9

Any question, please do not hesitate to get in touch with us.

Possibly Related Threads...
Thread:		Author	Replies:	Views:	Last Post
	MP54 Call Forwarding	pureit2018	0	137	11-23-2023 07:58 AM Last Post: pureit2018
	Enhanced DSS Key - Conference Call	joe1st	0	188	11-11-2023 05:27 AM Last Post: joe1st
	Unable to Answer call without pressing Line 1	TheKirbyGroup	0	262	11-03-2023 11:04 PM Last Post: TheKirbyGroup
	Yealink T28 setup audible ring on 2nd incoming call	JeffWilkinson	20	83,465	10-18-2023 12:59 PM Last Post: sles
	Picking up a call does not display Caller's Name	oliv	0	933	04-19-2023 04:25 PM Last Post: oliv
	Yealink T27P -Incoming call issue	rsarceno	0	995	01-25-2023 08:54 AM Last Post: rsarceno
	T27G call foward all	Aerium	0	1,119	09-13-2022 04:36 PM Last Post: Aerium
	Remebering call volume settings	SystemCraft	1	2,178	07-15-2022 07:42 PM Last Post: complex1
	Disable or override transfer soft button	rbohac	1	2,157	07-11-2022 10:26 PM Last Post: rbohac
	Disable Call Rejection	nicknomo	6	22,192	01-28-2022 03:51 PM Last Post: K4n4lj3

Threaded Mode \| Linear Mode Call Park Mode transfer on T48G
Author	Message