T41 Park command.

[anonymous1712222627012]

Hi Chris,
Here's your configuration,

features.call_park.park_mode = 2
features.call_park.enable = 1
features.call_park.park_code = 700
features.call_park.park_retrieve_code = 701

You have already set the park value to 700 and retrieve value to 701,
but in the line key 4, you set the call park value to 701 again.

linekey.4.type = 10 (this key type means call park, not retrieve)
linekey.4.value = 701 (no need to fill in the value as you have already set the value previously)
linekey.4.label = P701
linekey.4.line = 1

You need to update the linekeys configuration as below,

linekey.2.type = 10 (config the linekey 2 as a park key)
linekey.2.line = 1
linekey.2.label = Park

linekey.3.type = 56 (config the linekey 3 as a retrieve key)
linekey.3.line = 1
linekey.3.label = Retrieve

Kind Regards
Samuel Wang