[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T4XG series not able to autoprovision over https with FreePBX 14
Author Message
JaredBusch Offline
Junior Member
**

Posts: 11
Joined: Apr 2014
Reputation: 0
Post: #3
RE: T4XG series not able to autoprovision over https with FreePBX 14
(10-12-2017 02:33 PM)zouym Wrote:  Hi There

Thanks for your information , and i belive that it is the certificate not correct which may case this issue , you can confirm with elow setps :

1. Disable the "Only accepte trusted certificate" in web site.

2. Auto proviison with https again , it should work.

So my adivse is to use th bulit in certificate for https server , you can find all certficate infrmaiton from below link :

http://support.yealink.com/faq/faqInfo?id=691

BR
Michael

That is not the problem.
1. I have tested with that setting turned off.
2. I have test by loading hte LE cert from FreePBX into the Trusted Certificates.
3. The Firmware of the T42G and T46G I am testing with is 29.82.0.20 and 28.82.0.20 and these models are supposed to support LE with this firmware.

Inside FreePBX I receive a standard http error code of 408.

From the phone I see this.

Phone talking to FreePBX 13:
Code:
<134>Oct  8 03:48:37 ATP [1022]: ATP <6+info  > Upgrade from com.cfg
<134>Oct  8 03:48:37 LIBD[1022]: DCMN<6+info  > Connecting pbx.domain.com:1443
<134>Oct  8 03:48:37 LIBD[1022]: DCMN<6+info  > Connecting IP = 45.XXX.XXX.XXX, Port = 1443
<134>Oct  8 03:48:37 LIBD[1022]: DCMN<6+info  > ssl cipher num is 18
<134>Oct  8 03:48:37 LIBD[1022]: DCMN<6+info  > SSL_connect (read done)
<134>Oct  8 03:48:38 LIBD[1022]: DCMN<6+info  > SSL_connect (read done)
<134>Oct  8 03:48:38 LIBD[1022]: HTTP<6+info  > Request Line: GET /y000000000029.cfg HTTP/1.1
<134>Oct  8 03:48:38 LIBD[1022]: HTTP<6+info  > Host: pbx.domain.com:1443
<134>Oct  8 03:48:38 LIBD[1022]: HTTP<6+info  > User-Agent: Yealink SIP-T42G 29.82.0.20 00:15:65:65:xx:xx
<134>Oct  8 03:48:38 LIBD[1022]: HTTP<6+info  > process response
<133>Oct  8 03:48:38 LIBD[1022]: HTTP<5+notice> response code: 200
<134>Oct  8 03:48:38 LIBD[1022]: HTTP<6+info  > Content-Length: 12129
<134>Oct  8 03:48:38 LIBD[1022]: HTTP<6+info  > connection: close
<133>Oct  8 03:48:38 LIBD[1022]: HTTP<5+notice> response process finish!
<133>Oct  8 03:48:38 LIBD[1022]: HTTP<5+notice> recv : 12129 bytes
<134>Oct  8 03:48:38 ATP [1022]: ATP <6+info  > need_cmp_md5=1
<134>Oct  8 03:48:38 ATP [1022]: ATP <6+info  > cfg md5 same!
<132>Oct  8 03:48:38 ATP [1022]: ATP <4+warnin> error: phone_setting.inactive_backlight_level
<134>Oct  8 03:48:38 ATP [1022]: ATP <6+info  > skip item<phone_setting.inactive_backlight_level>
<134>Oct  8 03:48:38 ATP [1022]: ATP <6+info  > parse item finish

Phone Talking to FreePBX 14:
Code:
<134>Oct  8 03:33:08 ATP [780]: ATP <6+info  > Upgrade from mac.boot
<134>Oct  8 03:33:08 LIBD[780]: DCMN<6+info  > Connecting pbx.domain.com:1443
<134>Oct  8 03:33:08 LIBD[780]: DCMN<6+info  > Connecting IP = 107.XXX.XXX.XXX, Port = 1443
<134>Oct  8 03:33:08 LIBD[780]: DCMN<6+info  > SSL_connect (read done)
<134>Oct  8 03:33:08 Log [900]: WEB <6+info  > URI: /servlet?p=settings-autop&q=result&Rajax=0.09716529952707398
<134>Oct  8 03:33:08 Log [900]: ETLL<6+info  > mkit_call failed! src[0x000c72a8] name[__h900] tar[0xc4098f94] name[autoServer] msg[0x00030206] ret[-1] size[0]
<134>Oct  8 03:33:08 Log [900]: WEB <6+info  > Partition free(byte): /tmp/ [104325120], /config/ [90112], /data/ [90112]
<134>Oct  8 03:33:13 Log [900]: ETLL<6+info  > mkit_call failed! src[0x000c72a8] name[__h900] tar[0xc4098f94] name[autoServer] msg[0x00030206] ret[-1] size[0]
<134>Oct  8 03:33:13 Log [900]: WEB <6+info  > URI: /servlet?p=settings-autop&q=result&Rajax=0.8728236330210573
<134>Oct  8 03:33:13 Log [900]: WEB <6+info  > Partition free(byte): /tmp/ [104321024], /config/ [90112], /data/ [90112]
<134>Oct  8 03:33:18 Log [900]: WEB <6+info  > URI: /servlet?p=settings-autop&q=result&Rajax=0.649367081619797
<134>Oct  8 03:33:18 Log [900]: WEB <6+info  > Partition free(byte): /tmp/ [104316928], /config/ [90112], /data/ [90112]
<134>Oct  8 03:33:18 Log [900]: ETLL<6+info  > mkit_call failed! src[0x000c72a8] name[__h900] tar[0xc4098f94] name[autoServer] msg[0x00030206] ret[-1] size[0]
<134>Oct  8 03:33:23 Log [900]: WEB <6+info  > URI: /servlet?p=settings-autop&q=result&Rajax=0.6691534391904461
<134>Oct  8 03:33:23 Log [900]: ETLL<6+info  > mkit_call failed! src[0x000c72a8] name[__h900] tar[0xc4098f94] name[autoServer] msg[0x00030206] ret[-1] size[0]
<134>Oct  8 03:33:23 Log [900]: WEB <6+info  > Partition free(byte): /tmp/ [104316928], /config/ [90112], /data/ [90112]
<134>Oct  8 03:33:28 Log [900]: WEB <6+info  > URI: /servlet?p=settings-autop&q=result&Rajax=0.14837767361288257
<134>Oct  8 03:33:28 Log [900]: ETLL<6+info  > mkit_call failed! src[0x000c72a8] name[__h900] tar[0xc4098f94] name[autoServer] msg[0x00030206] ret[-1] size[0]
<134>Oct  8 03:33:28 Log [900]: WEB <6+info  > Partition free(byte): /tmp/ [104312832], /config/ [90112], /data/ [90112]
<134>Oct  8 03:33:33 Log [900]: WEB <6+info  > URI: /servlet?p=settings-autop&q=result&Rajax=0.9179317121887864
<134>Oct  8 03:33:33 Log [900]: WEB <6+info  > Partition free(byte): /tmp/ [104288256], /config/ [90112], /data/ [90112]
<134>Oct  8 03:33:33 Log [900]: ETLL<6+info  > mkit_call failed! src[0x000c72a8] name[__h900] tar[0xc4098f94] name[autoServer] msg[0x00030206] ret[-1] size[0]
<134>Oct  8 03:33:37 LIBD[780]: DCMN<6+info  > SSL_connect write/read error
<131>Oct  8 03:33:37 LIBD[780]: HTTP<3+error > Connect Error
<131>Oct  8 03:33:37 ATP [780]: ATP <3+error > https to file failed, code = -3, msg = Connect Failed, retry = 1
<134>Oct  8 03:33:37 ATP [780]: ATP <6+info  > Wait 0 second to next file transfer!

Notice that the initial connection never completes when talking to FreePBX 14. The phone never gets a cipher like it did with FreePBX 13. This line:
Code:
<134>Oct  8 03:48:37 LIBD[1022]: DCMN<6+info  > ssl cipher num is 18
(This post was last modified: 10-17-2017 04:51 AM by JaredBusch.)
10-17-2017 04:49 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: T4XG series not able to autoprovision over https with FreePBX 14 - JaredBusch - 10-17-2017 04:49 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
Question Autoprovision - LED Light Flashing [Resolved] voipsupport 1 765 05-01-2020 06:47 PM
Last Post: voipsupport
  T4xG no OpenVPN IP when using TAP Output101 2 2,825 04-11-2020 08:16 PM
Last Post: gordon0193
  T48S Autoprovision admin password srcurtis 3 5,820 06-12-2018 01:58 PM
Last Post: complex1
  T4xG series having time issues KNERD 4 4,959 04-20-2018 08:51 PM
Last Post: KNERD
  T4X S series - Skype for Business Administrator & User guides Shamintha 1 2,052 11-23-2017 02:18 AM
Last Post: Paul_Yealink
  T4X Series - PC Audio Only dkulesza 1 2,042 11-16-2017 08:38 AM
Last Post: Lucia_Yealink
Lightbulb [Feature Request] T4XS series - add USB headsets support RomanCC 0 1,441 10-29-2017 11:19 PM
Last Post: RomanCC
  autoprovision ringtones bug blakeflorin 5 5,220 10-04-2017 07:04 PM
Last Post: jcaruso
  Verizon Branded T46G repurposed to FreePBX? Jameson 1 2,938 08-28-2017 03:09 AM
Last Post: Seven_Yealink
  autoprovision VPN - $MAC blakeflorin 2 2,997 06-08-2017 05:06 PM
Last Post: blakeflorin

Forum Jump:


User(s) browsing this thread:

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication