Log in

JeffWilkinson · 07-15-2015 10:45 AM

Issue: 2 of my Yealink T28 phones randomly drop their config (as in factory reset). This has been happening for over 12 months. This does not happen to any of the other 20 x T28's in use. These 2 phones are located at the reception desk and are part of a call queue.
All the phones are setup as POE. The firmware is v2.71.1.1 (latest 3CX supported). This happened on v11 of 3CX (upgrading to v12.5 made no difference). We have also tried moving the phones to different ports on the POE switch (no difference - still dropped its config).

Setup: 3CX v12.5 system with Yealink T28's working across 3 sites. There is a VPN from each site back to a Data Centre where the 3CX server is located.

Any ideas why this is happening. We had a power out today at this site and the 2 reception phones dropped their config again.

Possibly Related Threads...
Thread:		Author	Replies:	Views:	Last Post
	T28p - Firmware version advice	Tato	2	16,302	09-11-2020 01:04 PM Last Post: Tato
	Where to find doc of LED config ($LEDr300o300$, ...) ?	oliv	1	5,745	01-15-2020 02:32 AM Last Post: anonymous1718628087441
	T28P & T38G: Speed Dial delay or pause between DTMF	yoda72	68	341,895	08-18-2019 09:06 PM Last Post: HotlineExperts
	cfg file and config.bin file syncing	softy783	1	6,202	05-29-2019 01:46 PM Last Post: jolouis
	T27G randomly waking up, backlight on	rcmcdonald91	4	12,925	06-15-2018 01:17 AM Last Post: anonymous1718628087441
	Bulk Config File Creation	Michelth	0	5,011	10-16-2017 11:10 AM Last Post: Michelth
	Disabled Keypad Tone - YEALINK T28P	janduy.manzanos@gmail.com	10	34,743	05-16-2017 04:14 PM Last Post: jolouis
	T28P re-register remotely	LeeDraper	1	8,217	05-04-2017 11:55 AM Last Post: Kevin_Yealink
	stop MAC config overwriting common config	rromano	1	6,721	04-14-2017 10:10 AM Last Post: Klaus_Yealink
	Why does T23G randomly negotiate 100Mb half duplex	avayax	4	15,063	02-25-2017 08:07 AM Last Post: complex1

Threaded Mode \| Linear Mode T28P dropping config randomly
Author	Message