T48S log file... "shit happed on check ROM info!"

[Aishion_Yealink]

(09-28-2017 08:55 PM)blakeflorin Wrote:  I'm running V82 on these new T48s phones. The distinctive ring tones can still only be set to the stock firmware ringtones residing in slots 1-10.

There's over 300 parameters on these phones, wide open that will accept any value entered in them valid or not through autoprovision. But for some reason these specific keys are locked down only to values 1-10

distinctive_ring_tones.alert_info.1.ringer =
distinctive_ring_tones.alert_info.2.ringer =
distinctive_ring_tones.alert_info.3.ringer =
distinctive_ring_tones.alert_info.4.ringer =

Its a simple fix....remove the check/restriction in the auto provision function on these keys.

Yealink gives the parameters to upload custom ringtones through autoprovision using the key (ringtone.url =). You can not overwrite stock firmware ringtones, these automatically start at value 11. I can set a parameter (distinctive_ring_tones.alert_info.#.ringer =) higher than 10 in the web interface. I can export the config with a set value higher than 10. I can also import the config manually into the phone with values higher than 10. This is an autoprovision bug. Fix it

I really wish Yealink would give us root access to terminal into these phones...I'd sign off on any warranty coverage for direct access to make them do what I want them to do. Even if its not supported, it should be a simple fix to make it supported.

Blake

Hi Blake,

Sorry that we can't provide you root assess for security reasons.

I just test my side with the latest V82 firmware T46S(T48S,T42S,T41S)-66.82.0.20.rom

http://download.support.yealink.com/down...2.0.20.rom

And try configured distinctive ring tone well through auto provision, please kindly find attached cfg file which I were successfully set distinctive ringtone for reference.

Would you please try to upgrade the firmware which I provided and test again, if the issue still exist, please kindly reproduce this issue and share us the config.bin file, level 6 syslog and trace that we can debug?About how to get these files, please refer below FAQ:

http://support.yealink.com/faq/faqInfo?id=313 Choose Solution 2

Any update, please feel free to let me know.

Best Regards
Aishion