[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T41P - Pressing Phone Line to Answer Call
Author Message
Aishion_Yealink Offline
Administrator
*******

Posts: 116
Joined: Mar 2017
Reputation: 1
Post: #2
RE: T41P - Pressing Phone Line to Answer Call
(09-12-2017 05:45 PM)thenz Wrote:  We are looking for some guidance on this issue

A the counter person picks up the handset and answers a call. When he hangs up that call the handset is bouncing and hanging up on the next person who is calling in .

Is there a way to program the phone so when the counter person picks up the receiver he has to push the flashing phone line button to pick up the call?

He would still hang up on the caller when finished by placing the receiver down but when he pick up the receiver to take the next call he would need to press a phone line button to answer the call.

Thanks for your help.

Dear,

Yealink support Answer By Hand feature after V81 version to answer call by press “Answer” soft key, please kindly set with below auto provision parameter:

features.off_hook_answer.enable = 0


It enables or disables the IP phone to answer an incoming call by picking up the handset directly.

0-Disabled

1-Enabled

If it is set to 0 (Disabled), you need to press the corresponding line key, the answer soft key or the OK key to answer an incoming call after picking up the handset.

You can download the firmware in our support web:

   

About how to auto provision, please kindly refer below guide:

http://download.support.yealink.com/down...V81_70.pdf

Any update, please feel free to contact us.

Best Regards
Aishion
09-13-2017 07:09 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: T41P - Pressing Phone Line to Answer Call - Aishion_Yealink - 09-13-2017 07:09 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T43-U incoming calls do not land on the correct line/button rtfm2022 7 721 05-12-2022 05:41 PM
Last Post: rtfm2022
  T4X no beep on intercom answer jcaruso 2 4,914 04-12-2022 04:46 AM
Last Post: JohnJ
  Phone message speed grstorga 0 338 04-08-2022 01:56 AM
Last Post: grstorga
  Phone A can reach Phone B, but Phone B cannot reach Phone A Reseau Web Plus 5 1,206 04-06-2022 11:03 PM
Last Post: complex1
  T46 - Program Message Button for a Help call? harrys 0 399 03-31-2022 11:08 PM
Last Post: harrys
  Paging to the phone coming through while on DND ahcomput_Support 7 1,847 03-26-2022 12:58 AM
Last Post: complex1
  Add the Remote Phone Book via a .cnf file sfrazier 6 2,018 02-04-2022 04:02 AM
Last Post: sfrazier
  Yealink T42S and T42G Phone stuck at Welcome Pierre06 7 3,696 01-10-2022 11:36 PM
Last Post: Pierre06
  Yealink T42G Phone stuck at Welcome LFC 8 18,567 11-18-2021 11:20 PM
Last Post: Pierre06
  Phone reboots and pauses on Initializing when PC port is used. gleblond 4 7,365 10-26-2021 03:17 AM
Last Post: gyegavian

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication