[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 1 Votes - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Multicast / Paging / Intercom - Yealink T58
Author Message
AUXIUM_Support Offline
Junior Member
**

Posts: 5
Joined: Aug 2017
Reputation: 0
Post: #19
RE: Multicast / Paging / Intercom - Yealink T58
(07-03-2019 03:13 PM)Chris708 Wrote:  Export your .cfg file for both phones and make sure the multicast addresses match.

Also, newer Yealink firmware has a Channel setting int he Multicast paging. I have not tested that so I left it out and it still works. It may default the channel to 0 when not specifically set via cfg file.

This is the Page All for one of our clients
--------------------------

### Listen Address ###
multicast.listen_address.1.label = Page All
multicast.listen_address.1.ip_address = 224.0.0.1:10001
multicast.listen_address.1.channel =

### Paging Address ###
multicast.paging_address.1.label = Page All
multicast.paging_address.1.ip_address = 224.0.0.1:10001
multicast.paging_address.1.channel =

-------------------------
I haven't worked with a Video phone so not sure if there is something different there but I reviewed the 58V and it seems no different than other Yealink Phones.

-------------------------

There is also a setting I found that will disable multicast paging. You can check that setting.
---
Paging Priority Active
Paging Priority Active feature decides how the phone handles incoming multicast paging calls
when there is already a multicast paging call on the phone. If enabled, the phone will ignore
incoming multicast paging calls with lower priorities, otherwise, the phone will answer incoming
multicast paging calls automatically and place the previous multicast paging call on hold. *** If
disabled, the phone will automatically ignore all incoming multicast paging calls.***
---

Thanks for the additional info.
Still no go.
I factory reset them, but still has issue receiving Multicast on the Yealink T58v.

I'll have to do more troubleshooting later.
07-03-2019 04:31 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Multicast / Paging / Intercom - Yealink T58 - Adam_Yealink - 09-18-2017, 03:10 AM
RE: Multicast / Paging / Intercom - Yealink T58 - AUXIUM_Support - 07-03-2019 04:31 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Yealink C920 password issue DaveK 3 5,749 09-11-2020 12:02 PM
Last Post: complex1
  Modern Yealink Phonebook Generation Tool rgranholm 2 6,144 04-30-2020 09:03 PM
Last Post: rgranholm
  YEALINK AUTO PROVISION Dmitryche 1 3,427 08-09-2019 09:25 AM
Last Post: Paz_Yealink
Question 3CX / Yealink passthrough VLAN issue (when phone is rebooted) maindriver 3 5,001 08-01-2019 12:19 PM
Last Post: Evan_Yealink
  Multicast Paging - Metaswitch EPP missing "Channel" ahull 1 3,617 11-27-2018 12:57 PM
Last Post: ahull
  Yealink Dialplan Alain 0 3,018 09-19-2018 05:10 PM
Last Post: Alain
  MultiCast Paging CP860 admin.calgary.demac 4 10,056 09-02-2018 04:34 AM
Last Post: Infotec
  Yealink T48S displays message "No service" David K L 1 5,828 04-17-2018 03:39 AM
Last Post: Paul_Yealink
  Yealink Dial Plan RobertCrawford 8 13,406 03-09-2018 06:38 AM
Last Post: Johnny88
  Multicast options not in manual USTI 1 4,120 01-18-2018 10:22 AM
Last Post: complex1

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication