New Forum system requires email address which you used to apply for your account to replace your original username. Password stays the same.Please see this post for more details
http://forum.yealink.com/forum/showthread.php?tid=40344

Yealink Test Club has been officially launched. Please visit post below to get detail information. Come and join us!
http://forum.yealink.com/forum/announcements.php?aid=18

We just had the YMCS online and we are also working on the features plan on the future versions, in this regard we are need to hear your voice about the YMCS.
Please visit : http://forum.yealink.com/forum/showthread.php?tid=42322


Post Reply 
 
Thread Rating:
  • 1 Votes - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Multicast / Paging / Intercom - Yealink T58
Author Message
Ryandh Offline
Junior Member
**

Posts: 10
Joined: Aug 2017
Reputation: 0
Post: #6
RE: Multicast / Paging / Intercom - Yealink T58
(09-12-2017 02:05 PM)jolouis Wrote:  When you initiate the page does the phone at least look like it's doing something, or does it just fail/sit idle?

If the screen changes to look like it's on a call, try running a Wireshark trace or some other kind of packet capture on the network and see if there are any multicast packets streaming over the network (ones with the address that you specified as the destination). That will at least tell you if the sending side is working.

Once you know if that is working or not you can then focus on the receiving phones and further troubleshoot from there...


It does initiate the phone you are paging from, but the receiving phone never indicates that any page is received.

I've already ran a trace / packet capture with Cisco Meraki on our network and they confirmed that the data was being sent and the data was reaching the port of the receiving phone. I can look for the email with the data / screenshot from Meraki but that was a month or so back so I will have to look for it.

What do you suggest?
09-13-2017 08:39 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Multicast / Paging / Intercom - Yealink T58 - Ryandh - 09-13-2017 08:39 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  YEALINK AUTO PROVISION Dmitryche 1 109 08-09-2019 09:25 AM
Last Post: Paz_Yealink
Question 3CX / Yealink passthrough VLAN issue (when phone is rebooted) maindriver 3 170 08-01-2019 12:19 PM
Last Post: Evan_Yealink
  Multicast Paging - Metaswitch EPP missing "Channel" ahull 1 751 11-27-2018 12:57 PM
Last Post: ahull
  Yealink Dialplan Alain 0 855 09-19-2018 05:10 PM
Last Post: Alain
  MultiCast Paging CP860 admin.calgary.demac 4 4,828 09-02-2018 04:34 AM
Last Post: Infotec
  Yealink T48S displays message "No service" David K L 1 2,030 04-17-2018 03:39 AM
Last Post: Paul_Yealink
  Yealink Dial Plan RobertCrawford 8 4,386 03-09-2018 06:38 AM
Last Post: Johnny88
  Multicast options not in manual USTI 1 1,395 01-18-2018 10:22 AM
Last Post: complex1
  Yealink secure certificates and disabling ciphers Scot E. 1 1,464 12-29-2017 03:40 AM
Last Post: Lucia_Yealink
  Call Parking - Yealink Phone - Asterisk 11 vs 13 Velocita Technology 1 1,665 12-26-2017 06:06 AM
Last Post: Lucia_Yealink

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication