New Forum system requires email address which you used to apply for your account to replace your original username. Password stays the same.Please see this post for more details

Yealink Test Club has been officially launched. Please visit post below to get detail information. Come and join us!

We just had the YMCS online and we are also working on the features plan on the future versions, in this regard we are need to hear your voice about the YMCS.
Please visit :

Post Reply 
Thread Rating:
  • 1 Votes - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Multicast / Paging / Intercom - Yealink T58
Author Message
Ryandh Offline
Junior Member

Posts: 10
Joined: Aug 2017
Reputation: 0
Post: #1
Multicast / Paging / Intercom - Yealink T58
We are wanting to have an intercom / paging system with our phones. We have Vonage Business, and although they have been able to get the feature to work on the phones in their lab, they have not been able to get the mutlicast / intercom feature to work on the phones in our office.

I have reviewed the manual, played with the settings for hours, but just can't get it to work.

Firmware Version
Hardware Version
Internet Port IPv4
WAN Port Type DHCP
WAN IP Address
Subnet Mask
Primary DNS
Secondary DNS

These are the instructions I've been attempting to implement.
The multicast paging feature allows the IP phones to send/receive Real-time Transport
Protocol (RTP) stream to/from the pre-configured multicast address(es) without involving
SIP signaling. You can specify up to 10 listening multicast addresses on IP phones.
For the phones to be able to send and receive multicast paging we need to do the following:
•Send Multicast - We will add a Button to send a page.
•Select a Codec - We will use the default Codec G722.
•Receive Multicast - Add the listening address to receive a page.
Please note that this article was written for a Yealink T22P. Not all Yealink support this feature.
Adding a Paging Button (DSS Key)
To configure a multicast paging key (This is to SEND the page) via web user interface:
1.Click on the Phone tab.
2.Select DSS Key.
3.In the desired DSS Key or Line Key select "Multicast Paging" from the Type dropdown menu.
4.Enter the multicast IP address and port number in the "Value" field.
5.Click "Confirm" to accept the changes.
The valid multicast IP addresses range from to and a port number.
For this example we will be using as the value (#4).
Codec for Multicast Paging
To Configure a codec for multicast paging via web user interface:
1.Click on the Phone tab.
2.Go to Features.
3.Select the desired Codec from the Multicast Codec dropdown menu (keep the default G722).
4.Click "Confirm" to accept the changes.
Receive the Multicast Page
In order to receive the multicast page, the following must be done.
1.Click on the Contacts tab.
2.Go to MulticastIP
3.Enter the listening multicast address and port number in the Listening Address field.
4.Enter the label in the Label field. **The label will appear on the LCD screen when receiving the RTP multicast
5.Click "Confirm" to accept the changes.

For this example we will be using as the listening address - #3 (The same address used to send multicast paging). Configure this setting on all the phones you will be paging. You will then be able to page multiple phones from the phone you configured to page using the line key or DSS Key.

Attached File(s) Thumbnail(s)
09-01-2017 08:35 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 

Messages In This Thread
Multicast / Paging / Intercom - Yealink T58 - Ryandh - 09-01-2017 08:35 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  YEALINK AUTO PROVISION Dmitryche 1 233 08-09-2019 09:25 AM
Last Post: Paz_Yealink
Question 3CX / Yealink passthrough VLAN issue (when phone is rebooted) maindriver 3 323 08-01-2019 12:19 PM
Last Post: Evan_Yealink
  Multicast Paging - Metaswitch EPP missing "Channel" ahull 1 808 11-27-2018 12:57 PM
Last Post: ahull
  Yealink Dialplan Alain 0 905 09-19-2018 05:10 PM
Last Post: Alain
  MultiCast Paging CP860 admin.calgary.demac 4 4,954 09-02-2018 04:34 AM
Last Post: Infotec
  Yealink T48S displays message "No service" David K L 1 2,127 04-17-2018 03:39 AM
Last Post: Paul_Yealink
  Yealink Dial Plan RobertCrawford 8 4,620 03-09-2018 06:38 AM
Last Post: Johnny88
  Multicast options not in manual USTI 1 1,475 01-18-2018 10:22 AM
Last Post: complex1
  Yealink secure certificates and disabling ciphers Scot E. 1 1,553 12-29-2017 03:40 AM
Last Post: Lucia_Yealink
  Call Parking - Yealink Phone - Asterisk 11 vs 13 Velocita Technology 1 1,751 12-26-2017 06:06 AM
Last Post: Lucia_Yealink

Forum Jump:

User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication