[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T42G VLAN settings for PC VLAN
Author Message
jolouis Offline
Moderator
*****

Posts: 339
Joined: Oct 2013
Reputation: 6
Post: #4
RE: T42G VLAN settings for PC VLAN
(08-31-2017 08:43 AM)Uwe Wrote:  How can I make this work with the T42G? The T42G should get an IP address from thge VLAN 41 and the PC should get an IP address from VLAN 31.

Configure the switch port so that:
a) VLAN 41 is allowed as tagged
b) Untagged/default VLAN for the port is 31.

Then configure the T42G under advanced network settings to have VLAN ID of 41. Make sure Span to PC is disabled.

That should do it. When you power on the phone, all traffic from it will try to communicate on VLAN 41. When you plug any device into the PC port on the back of the phone, it will be passed to the switch untagged, and the switch will assign it/treat it as part of VLAN 31.
09-05-2017 09:58 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
T42G VLAN settings for PC VLAN - Uwe - 08-29-2017, 11:52 AM
RE: T42G VLAN settings for PC VLAN - Uwe - 08-31-2017, 08:43 AM
RE: T42G VLAN settings for PC VLAN - jolouis - 09-05-2017 09:58 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Increase BLF Label Field T42G redmondsau 0 390 09-08-2020 11:12 PM
Last Post: redmondsau
  Vlan to no vlan pstauner@computersupportg.com 0 434 08-06-2020 09:23 PM
Last Post: pstauner@computersupportg.com
  [SOLVED] OpenVPN not doing anything T42G V83 Danariel 5 4,532 03-27-2020 02:32 PM
Last Post: jamesg224
  T42G with firmware T42-29.83.0.120.rom compsos 1 1,467 02-03-2020 07:48 PM
Last Post: complex1
  Voice vlan IPv6 addresses appearing on PC on T48S danzoom 1 1,301 08-01-2019 09:48 PM
Last Post: danzoom
  T42S - After factory reset settings still there alexcoconut 4 3,563 08-01-2019 05:30 PM
Last Post: jolouis
  Move from SfB to Teams with T42G helios.comms 0 1,099 05-21-2019 07:51 PM
Last Post: helios.comms
  Missing Directory settings GroupOne_Support 0 1,251 12-11-2018 10:18 PM
Last Post: GroupOne_Support
  Echo when using headset on T46S and T42G IZT-crobinson 0 1,482 11-27-2018 02:25 AM
Last Post: IZT-crobinson
  T42G recovery files needed Global Data Systems 0 1,660 11-12-2018 09:15 PM
Last Post: Global Data Systems

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication