T42G VLAN settings for PC VLAN

[Travis_Yealink]

(08-29-2017 11:52 AM)Uwe Wrote:  Hi,
we are new to Yealink phones. We want to use a T42G connected to VLAN 41 und thru the phone a PC connected to VLAN 31.

The Switches are HPE / aruba HP 2530-48G-PoEP Switch (J9772A)

the phone: Firmware Version 29.80.150.2
Hardware Version 29.1.0.0.0.0.0

We tried:
switchport VLAN 41 untagged, VLAN 31 tagged
switchport VLAN 41 tagged, VLAN 31 tagged
Phone:
WAN port disabled / enabled, VID 41
PC Port diesbled / enabled, VID 31

In some cases the PC gets a IP address from VLAN 41, or apipa address

In no config it gets an IP from VLAN 31.

What is the correct configuration on the switch and the phone?

Thanks
Uwe

Hi Uwe,

Do you mean the network cable of PC is connected to the PC port of the phone?
What you want is phone and PC get IP address from different Vlan?

BR
Yealink_Travis