[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T48s show Talking on users who are not on an active call
Author Message
Scott311 Offline
Junior Member
**

Posts: 17
Joined: May 2017
Reputation: 0
Post: #27
RE: T48s show Talking on users who are not on an active call
(11-03-2017 02:06 PM)Daodeth Wrote:  
(11-03-2017 02:01 PM)Scott311 Wrote:  
(11-03-2017 01:57 PM)Daodeth Wrote:  
(11-03-2017 01:43 PM)Scott311 Wrote:  
(11-03-2017 01:17 PM)Daodeth Wrote:  Are you exporting the config from the T48s, the trouble phones, or the Voip provider.
Sorry for the many questions, but thank you for the help.

No problem, and I understand I worked on this for quite some time. I am exporting the config from the phones.

Actually Yealink helped me find this issue, I exported it from the phone, changed the config on the phone and imported it back. I know its timely but if your VOIP provider has a specific area where you can set Parameters up on your phones you can add this too your entire subscriber base via a Parameter.

So I got the config from "settings/configuration/export CFG configuration/all settings" don't see any headings for "transfer:hang up"

Am I missing a step?

It would be: transfer.hang_up_after_success_trans = 3

Mine was near the bottom of the config.

Would you mind looking at my config and see if I'm missing something.

Now question for you before I look at it, does it do it on all of your phones? Because it did not do it on all of our phones. It seemed to be ones we had setup with a call group. I would make sure you have a phone that it specifically is happening on where it shows "Talking"
11-03-2017 02:09 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: T48s show Talking on users who are not on an active call - Scott311 - 11-03-2017 02:09 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T48s fw 66.84.0.15 Verizon - Need Recovery FW jonnya_ny 2 3,413 01-30-2024 05:23 AM
Last Post: jonnya_ny
  Call Waiting Beep glennbtn 0 1,265 12-18-2023 05:22 PM
Last Post: glennbtn
  T48S DSS softkeys can only show two at at time afogul 0 1,239 12-09-2023 05:50 AM
Last Post: afogul
  t46u , call waiting, ring sles 1 2,108 11-30-2023 05:29 AM
Last Post: msachs
  T48U BLF Park Call not working timotel 0 1,633 09-20-2023 07:20 AM
Last Post: timotel
  T48S Handset logo and menu style jseeley 0 1,550 09-05-2023 08:52 AM
Last Post: jseeley
  T48G Connected handset not answering or ending call with connected handset. Pettis 4 4,781 07-27-2023 05:38 AM
Last Post: Lissvazquez
  T48U BLF show line status for selected users integral 2 3,441 07-17-2023 12:51 AM
Last Post: integral
  T43U T42S Call Park BLF robm 0 1,757 05-19-2023 12:16 AM
Last Post: robm
  T48S BLF Talking vs Ringing JordanHVRA 0 1,716 04-05-2023 01:31 PM
Last Post: JordanHVRA

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication