[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T48s show Talking on users who are not on an active call
Author Message
Scott311 Offline
Junior Member
**

Posts: 17
Joined: May 2017
Reputation: 0
Post: #25
RE: T48s show Talking on users who are not on an active call
(11-03-2017 01:57 PM)Daodeth Wrote:  
(11-03-2017 01:43 PM)Scott311 Wrote:  
(11-03-2017 01:17 PM)Daodeth Wrote:  
(11-03-2017 12:47 PM)Scott311 Wrote:  I do not work with yealink and I do not know your voip provider. I would first export the config and see what that line code looks like. If it not the default it will show up in there. There is no setting in the GUI that I could ever find.

Are you exporting the config from the T48s, the trouble phones, or the Voip provider.
Sorry for the many questions, but thank you for the help.

No problem, and I understand I worked on this for quite some time. I am exporting the config from the phones.

Actually Yealink helped me find this issue, I exported it from the phone, changed the config on the phone and imported it back. I know its timely but if your VOIP provider has a specific area where you can set Parameters up on your phones you can add this too your entire subscriber base via a Parameter.

So I got the config from "settings/configuration/export CFG configuration/all settings" don't see any headings for "transfer:hang up"

Am I missing a step?

It would be: transfer.hang_up_after_success_trans = 3

Mine was near the bottom of the config.
11-03-2017 02:01 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: T48s show Talking on users who are not on an active call - Scott311 - 11-03-2017 02:01 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Yealink T48s Firmware update failed dangmoss 1 306 01-15-2022 04:40 AM
Last Post: complex1
  Problem Change Firmware T48s from SFB to SIP Lars Maschke 2 857 01-14-2022 10:22 AM
Last Post: kumagera
  BLF Ringing overwrites Talking HamburgerJungeJr 5 7,028 09-15-2021 01:37 AM
Last Post: phoneone
  T48s setting outbound caller ID thunderzhao 1 1,427 09-10-2021 04:08 PM
Last Post: complex1
  Ended call still rings on receiver devices casi-online 2 2,103 08-05-2021 06:40 PM
Last Post: casi-online
  Rearrange in call buttons frichardson 0 1,238 06-16-2021 11:53 PM
Last Post: frichardson
  DND Showing as "Talking" on BLF Key stchelpdesk 1 2,188 06-07-2021 04:45 PM
Last Post: nick9289
  T41S: Bridge current call with a second incoming call digitel 1 2,012 05-21-2021 04:15 PM
Last Post: complex1
  Public Phonebook on incomming call Oliaargau 3 7,629 04-16-2021 05:34 PM
Last Post: Oliaargau
  Stop displaying Username on phone after call is connected rtilleman 1 2,854 04-06-2021 12:19 AM
Last Post: marcelm

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication