Provisioning in v81 and encryption

[eagle21221]

The way i found out is a pain and alot of work.

you need to set a boot file for each phone. IE the phone's "macaddress.boot"

Then inside the "macaddress.boot" have:
########################
#!version:1.0.0.1
## The header above must appear as-is in the first line

include:config <encrypt.cfg> #<- not encrypted
include:config "y0000000000xx.cfg" #<- encrypted
include:config "macaddress.cfg" #<- encrypted

overwrite_mode = 1
########################

Inside encrypt.cfg
########################
#!version:1.0.0.1
static.auto_provision.aes_key_in_file = 1

#it seems to lose its provisioning settings after the first time you run it.
static.auto_provision.server.url =
static.auto_provision.server.username =
static.auto_provision.server.password =
########################
Then put the files in the root folder of the provision server url.

encrypt.cfg #<- not encrypted
y0000000000xx.cfg #<- encrypted
macaddress.cfg #<- encrypted

its a pain and you need to run it twice, first time it goes through and sets decrypt by file, and the second time it auto provisions it decrypts the files.

another easier way is just use a site AES key and when your setting up the auto provision server on the phone you just input the site AES key for both common and mac. Better than going through and setting up a boot for each phone.