[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.

Post Reply 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T41P: Call Park Problem
Author Message
SFA1492 Offline
Junior Member

Posts: 13
Joined: Mar 2016
Reputation: 0
Post: #1
T41P: Call Park Problem

I am having some difficulties to make "Call Park" work on my T41P.
The phone has "Call Park Mode" set to "Transfer", "Call Park" is "Enabled", "Call Park Code" is set to "*21" and "Park Retrieve Code" is set to "**21".

When I receive a call which I would like to put into a queue by pressing "Park" my display will show "Transferred" for a fraction of a second and hangs up. So far so good. But the caller gets disconnected - not so good.
If I do it manually by pressing "Transfer" followed by "*21" it takes a second, I get a positive feedback tone from my PBX, my phone hangs up and the caller gets into the queue.
It works the same way if I program a DSS Key as a Transfer-Button and put "*21" in as Value. After a second I get a positive feedback tone from my PBX, my phone hangs up and the caller gets into the queue.

Once I have a caller in my queue I can get him back by pressing a DSS Key programmed as "Park retrieve". So that at least works with my PBX.

Since the manual way works and the park procedure should the same thing - accoording to my understanding - I assume the the problem is located on the phone.
Is it possible that there is a firmware bug responsible for the behaviour. Installed version is
(This post was last modified: 07-19-2017 04:33 PM by SFA1492.)
07-19-2017 04:31 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 

Messages In This Thread
T41P: Call Park Problem - SFA1492 - 07-19-2017 04:31 PM
RE: T41P: Call Park Problem - SFA1492 - 07-22-2017, 09:24 AM
RE: T41P: Call Park Problem - Samuel_Yealink - 07-25-2017, 01:17 PM
RE: T41P: Call Park Problem - SFA1492 - 07-25-2017, 08:37 PM
RE: T41P: Call Park Problem - Samuel_Yealink - 09-06-2017, 03:01 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T46 - Program Message Button for a Help call? harrys 0 392 03-31-2022 11:08 PM
Last Post: harrys
  Problem Change Firmware T48s from SFB to SIP Lars Maschke 2 2,109 01-14-2022 10:22 AM
Last Post: kumagera
  Ended call still rings on receiver devices casi-online 2 3,040 08-05-2021 06:40 PM
Last Post: casi-online
  T41P/T48G/T58V IPv6 SIP Issues ReubenFarrelly 22 45,258 08-01-2021 06:14 PM
Last Post: Phil2021
  Rearrange in call buttons frichardson 0 1,643 06-16-2021 11:53 PM
Last Post: frichardson
  T41P Yealink phone wants to talk to the Verizon mother ship nestman 1 2,759 06-14-2021 05:00 PM
Last Post: complex1
  T41P and OpenVPN coltarushalo 0 1,838 05-26-2021 02:58 AM
Last Post: coltarushalo
  T41S: Bridge current call with a second incoming call digitel 1 2,658 05-21-2021 04:15 PM
Last Post: complex1
  Public Phonebook on incomming call Oliaargau 3 8,618 04-16-2021 05:34 PM
Last Post: Oliaargau
  Stop displaying Username on phone after call is connected rtilleman 1 3,432 04-06-2021 12:19 AM
Last Post: marcelm

Forum Jump:

User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication