[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
EHS36 for Plantronics CS520
Author Message
lorn10 Offline
Junior Member
**

Posts: 43
Joined: Feb 2014
Reputation: 0
Post: #2
RE: EHS36 for Plantronics CS520
(07-19-2017 08:29 AM)Danielll Wrote:  Well guys, finally i bought for myself EHS36 remote connector to use with the Plantronics CS520 remote headset on one of the Yealink T26p telephone.Take after the EHS36 Client control guidelines identified with Plantronics remote headset, it neglects to work. At the point when inbound call to the T26p telephone, it rings however on the Platronics remote headset, I hear 3 short beeps rather than customary ring tone. After squeezing the noting catch on the Plantronics, I can't hear the guest. I saw the headset light Driven on unfaltering green and the T26p screen shows "Talking" status however I don't hear any voice. ...

Okay, - this answer may be somewhat too late. ;-) However, - I have found the reason of that problem. There seems to exist a fundamental incompatibility with new EHS36 models (which contains firmware 4.16.0.0) and old V7x based IP phones.

I can confirm this for the T38G IP phone model. Solution: EHS36 firmware downgrade!

I am now on EHS36 firmware v2.16.0.0 and my Plantronics CS540 is working almost perfectly! So everyone which has the same problem should try a EHS36 firmware downgrade.

Regarding the T26p IP phone model I recommend EHS36 firmware v3.16.0.0. This one should be the correct one for V73 firmware based phones (like the T26p).

More Information can be found here:
http://forum.yealink.com/forum/showthread.php?tid=41584

Kind regards
lorn10
(This post was last modified: 09-18-2018 04:12 PM by lorn10.)
09-18-2018 04:11 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
EHS36 for Plantronics CS520 - Danielll - 07-19-2017, 08:29 AM
RE: EHS36 for Plantronics CS520 - lorn10 - 09-18-2018 04:11 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  EHS36 + DW Pro2 + beep bart@wiggers.com 1 2,122 09-11-2023 09:11 PM
Last Post: Yisroel_MongoTEL
  T48G + EHS36 + Sennheiser DW Pro - No Ring Tone miclan 1 6,986 08-25-2022 03:04 AM
Last Post: knewgent
  SIP-T29G & EHS36 Need Off-Hook Signal! Rob2001 0 2,545 04-26-2022 09:05 PM
Last Post: Rob2001
  T55A Teams Edition + EHS40 & Plantronics W740 craig.itdd 3 13,270 11-14-2020 02:05 AM
Last Post: BFlow
  Compatible RJ12 cable for EHS36 bnmand 3 10,913 10-29-2020 04:23 PM
Last Post: complex1
  EHS36 dead with T46G SCPCJNR 1 7,613 10-27-2020 08:08 AM
Last Post: bnmand
Question EH36 w/ CS510 Plantronics and T29G phone on Expansion Modules CHRISTOPHER 0 5,384 06-16-2020 02:41 PM
Last Post: CHRISTOPHER
  Update EHS36 with T41P? SPS 2 8,642 03-24-2020 01:20 PM
Last Post: Yisroel_MongoTEL
  t-29G with EHS36 and Plantronics CS510 davidfudge 1 8,946 12-02-2019 01:41 PM
Last Post: anonymous1718628087441
  T48G, EHS36 and Plantronics CS510 cmedvick 2 10,026 10-23-2019 02:17 PM
Last Post: cmedvick

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication