[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Outgoing Calls only works with 10 digit dial - Skype for Business
Author Message
jvoros Offline
Junior Member
**

Posts: 16
Joined: May 2017
Reputation: 0
Post: #1
Outgoing Calls only works with 10 digit dial - Skype for Business
T48G with firmware 35.8.0.70 connected to a Hybrid deployment of Skype for Business (0365 and Lync 2013 on Prem) with Cisco UC acting as the PBX on prem to SIP trunks.

Newly configured devices we are trying as we start our migration to this platform.

We are unable to make Outbound calls from the device unless we use full e.164 dialing. For example +1 212-555-1212
All other calls end in a busy signal and 'call failed' error. You must use the +

What works:
Skype to Skype Calls - Inbound / Outbound as chosen from addressbook
Inbound Voice calls (i.e. someone calls the xxx-xxx-xxxx number)
Outgoing calls if +1xxx-xxx-xxxx

What doesn't work:
Four digit dial. we use 4 digit extensions in the office. example 1212
Our cisco is configured to dial 9 for external calls so 9-1-212-555-1212. This does not work
1-212-555-1212 also doesn't work

Connected as the same user account in SfB:
When using our Skype soft client (on a notebook) all of these work
When using a Polycom VVX600 connected through SfB, all of these work

The polycom is configured the same way as the Yealink and it works.

Neither device has the concept of dial plans that let you do replacements on the device themselves. The yealink only has Dial Now which is more like a quick dial feature than a replacement feature. There doesn't appear to be any settings for e.164 or the ability to recognize short extensions. SfB doesn't have these settings in it. Still need to investigate cisco but the fact that the polycom works makes me think its the phone settings and less the server side.

What am I missing?
05-04-2017 11:54 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
Outgoing Calls only works with 10 digit dial - Skype for Business - jvoros - 05-04-2017 11:54 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
Question Switch account on T48S - Outgoing caller ID remains at default account puregin 0 261 09-30-2020 09:52 AM
Last Post: puregin
  t46s calls on hold operation comstar 7 3,533 09-22-2020 06:27 PM
Last Post: Yisroel_MongoTEL
  Join 2 calls ccwtech 4 1,347 03-02-2020 03:44 PM
Last Post: ccwtech
  Speed dial Key adds pickup code when it shouldn't chrischevy 1 978 12-10-2019 03:14 PM
Last Post: JaredBusch
  Yealink T48, Mutiple lines - Deny incomming calls. mojoJED 1 1,009 11-13-2019 09:22 PM
Last Post: jolouis
  T48S/G dial plan sprintership 8 2,942 10-21-2019 01:02 PM
Last Post: jolouis
  Skype for Business contact called by e-mail and not phone number primator 0 817 09-10-2019 02:08 PM
Last Post: primator
  Transferring calls on Kixie using the T46S Ianlindgren 1 1,546 07-11-2019 01:04 PM
Last Post: Jacky_Yealink
  Create conference with 2 existing calls chrischevy 1 1,147 05-24-2019 08:19 AM
Last Post: Evan_Yealink
  External Calls - Caller ID on attended transfer Tim_B 5 5,557 05-12-2019 01:11 PM
Last Post: complex1

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication