[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Firmware upgrade with provisioning url(relative)
Author Message
arvind.zapp Offline
Junior Member
**

Posts: 17
Joined: Jul 2014
Reputation: 0
Post: #3
RE: Firmware upgrade with provisioning url(relative)
Thanks,
The provisioning address is obtained via DHCP. if there is a mechanism (as i explained), it would be easier to automate the process since we do not need to change config file parameter.
Also current Yealink phone behavior(if it is as you say) is best suited when provision server and phones are in same network. Since provisioning server itself writes the firmware url in our case, it become complex when its behind SBC/Firewall/proxy.In these cases provisioning server may not be aware of FQDN used by phone to reach provisioning server so there is no way to give full url including hostname.

Instead if phone supports the feature, provisioning server could just write relative path. IP Phone would take it up and append it with provisioning server FQDN and send the request.
Relative path works best for load balancing among provisioning servers as well during firmware upgrade.
For polycom, the provisioning server FQDN obtained via DHCP is used for firmware upgrade as well. They just append default firmware file name in it.

Thats why i am looking for it.
(This post was last modified: 04-18-2017 03:56 PM by arvind.zapp.)
04-18-2017 03:54 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Firmware upgrade with provisioning url(relative) - arvind.zapp - 04-18-2017 03:54 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  MP54 Firmware guywonnacott 0 2,894 05-04-2023 05:56 PM
Last Post: guywonnacott
  T19p E2 recovery firmware Jensen 1 3,953 10-25-2022 07:33 PM
Last Post: complex1
  T27G Firmware Update Failed Infonetx 8 25,349 08-03-2020 03:16 PM
Last Post: complex1
  T19P E2 auto provision firmware. NI 1 8,626 10-08-2018 05:15 PM
Last Post: NI
  Yealink T58A Firmware runek@sildelaget.no 0 9,470 07-04-2018 01:04 PM
Last Post: runek@sildelaget.no
  VP 2009 unable to boot, safe boot or upgrade? TTCPeter 8 22,367 09-08-2017 07:10 AM
Last Post: Tdit
  [W52P+W56P] Same base station with with different handset models - Auto-provisioning Asanka 5 21,160 08-25-2017 02:21 PM
Last Post: SteveDavies
  T23G Recovery Firmware Needed tshaner 6 22,846 08-11-2017 03:30 PM
Last Post: Complete IT_Support
  Fonality Firmware STUCK david.ayers 6 21,297 07-06-2017 08:28 PM
Last Post: ninjoan
  cannot disable auto provisioning W52P - W56H Babaloo71 5 18,222 02-21-2017 06:59 AM
Last Post: Karl_Yealink

Forum Jump:


User(s) browsing this thread:

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication