New Forum system requires email address which you used to apply for your account to replace your original username. Password stays the same.Please see this post for more details
http://forum.yealink.com/forum/showthread.php?tid=40344

Yealink Test Club has been officially launched. Please visit post below to get detail information. Come and join us!
http://forum.yealink.com/forum/announcements.php?aid=18

We just had the YMCS online and we are also working on the features plan on the future versions, in this regard we are need to hear your voice about the YMCS.
Please visit : http://forum.yealink.com/forum/showthread.php?tid=42322


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
HTTP only
Author Message
celito Offline
DevOps Engineer
**

Posts: 16
Joined: Oct 2015
Reputation: 0
Post: #7
RE: HTTP only
(06-02-2017 02:48 PM)ModCraig Wrote:  So T48
Let me goto the handset and enable HTTPS so I can get more info on firmware, etc....
.
.
.
firmware 35.81.0.70
hardware 35.0.0.0.0.0.0

In Chrome I checked the sticky settings that remember HTTPS - this IP is not in the list.
I tried Safari
I tried Edge
I tried IE

Perhaps there is another setting besides just disabling HTTPS?
I tried a Wireshark - but can not figure out anything...

On another note - do your units have, under Features -> Forward and DND - Ia place to set DND on and DND Off Dial Codes? I did until the latest firmware and now it is gone.

Hey Craig (sorry about typing Greg before... I knew it was Craig but my fingers said otherwise),

I shot a quick video for you: https://youtu.be/436j0FqnJnE

I put a T48G on the same firmware as you and it worked as expected. I pulled up Chrome's dev tools to confirm it was HTTP and not HTTPS. I also navigated to the Features tab to show the DND On/Off codes were there.

I know this doesn't help you fix the problem, but I'm at least showing I couldn't replicate it. Maybe try testing it on a phone that has been factory reset and not provisioned in any way?
06-02-2017 05:53 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
HTTP only - ModCraig - 03-28-2017, 10:53 PM
RE: HTTP only - Andrew_Yealink - 04-01-2017, 08:46 AM
RE: HTTP only - ModCraig - 04-01-2017, 11:16 PM
RE: HTTP only - ModCraig - 06-01-2017, 10:54 PM
RE: HTTP only - celito - 06-02-2017, 02:13 PM
RE: HTTP only - ModCraig - 06-02-2017, 02:48 PM
RE: HTTP only - celito - 06-02-2017 05:53 PM
RE: HTTP only - ModCraig - 06-02-2017, 06:41 PM
RE: HTTP only - celito - 06-02-2017, 06:58 PM
RE: HTTP only - Jazzy - 06-04-2017, 10:37 AM
RE: HTTP only - ModCraig - 06-04-2017, 07:53 PM
RE: HTTP only - complex1 - 07-23-2017, 07:47 PM
RE: HTTP only - ModCraig - 06-02-2017, 09:58 PM
RE: HTTP only - Johnson_Yealink - 07-24-2017, 10:18 AM
RE: HTTP only - Johnson_Yealink - 07-27-2017, 07:51 AM
RE: HTTP only - complex1 - 07-27-2017, 07:55 PM
RE: HTTP only - justingoldberg - 08-05-2019, 02:46 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  How to Provision firmware using http simplephoneco_Support 1 2,530 12-22-2015 05:13 AM
Last Post: Karl_Yealink
  T48G - HTTP Requests Headon_Support 1 2,454 12-03-2014 11:46 AM
Last Post: Lucas1

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication