T46G - Display IP Cam Picture or MJPG Video Stream via DSS Key

[jolouis]

Nope this is another one of those "hmmm should have been done but wasnt" things. We tried a number of different ways to approach this and came to the conclusions your only choices with Yealink were:
1) Use a T49 and do a SIP video call to a SIP-friendly IP camera/door phone
2) Wire up a DSS key to launch an XML browser to the server, and have the server run a script that grabs a single frame from the camera, re-sizes it to what the phone expects, and then displays it. Not ideal in any way, but better than nothing.
3) Give up and sell the customer a $50 7"Android tablet to put beside their phone with the manufacturer's viewer software installed.

I'm sure Yealink could easily implement at least low frame rate MJPEG on T48/T46 and maybe even T29s, but my guess is demand for it is low or they want you to just buy T49s. In the end we went with option #3 because it was by far the easiset and most cost effective, as users ended up wanting to have their video feeds running while talking on the phone and while sitting idle, without that interfering with caller display/etc.