[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T48G Power LED blinking when screen off
Author Message
TM2-Megatron Offline
Junior Member
**

Posts: 4
Joined: Aug 2015
Reputation: 0
Post: #1
T48G Power LED blinking when screen off
After updating to the latest firmware on my T48G (35.81.0.25), I've noticed an irritating behavior that the phone never exhibited before. Whenever the screen goes off (in the GUI I have Unused Backlight set to off with a 2 minute delay), the Power LED light starts blinking slowly. This doesn't happen when I change the Unused Backlight setting to low.

I can't find any setting related to the Power LED that stops this from happening, nor do I know if this is simply the way the new firmware tells the phone to behave or not. I've tried a factory reset of the phone, and it still happens. It also isn't related to my VOIP service provider, as the phone exhibits the behavior before I even setup an SIP account on in it. If this is some new desired behavior, I'd appreciate an option be added in the phone's GUI to disable it. I find it irritating as I only want the LED to blink like that when there's a voicemail waiting. But now, whenever the screen goes off the phone behaves as if I have a voicemail, and the only way to know for sure is to hit a button to switch on the screen.
(This post was last modified: 03-05-2017 01:44 AM by TM2-Megatron.)
03-05-2017 01:41 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
T48G Power LED blinking when screen off - TM2-Megatron - 03-05-2017 01:41 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T48G/T49G on Ring Central? Gordon 2 9,280 12-27-2023 10:38 AM
Last Post: jseeley
  T42G - Stuck at Welcome screen Maciejp 1 753 12-22-2023 01:47 AM
Last Post: complex1
  exp43 Stuck on Wellcome Screen nolto 5 4,300 12-15-2023 02:48 PM
Last Post: sles
  T48G Top row keypad buttons requiring too much pressure after time Chris708 4 9,823 11-16-2023 01:08 AM
Last Post: here4real
  T46U + EXP43 Stuck on Welcome Screen after update danantonielli 2 2,996 10-06-2023 10:04 PM
Last Post: roland@simplicloud.co.za
  T48G Connected handset not answering or ending call with connected handset. Pettis 4 2,325 07-27-2023 05:38 AM
Last Post: Lissvazquez
Photo T46G LED blinks when screen is off W 4 8,133 03-29-2023 05:36 AM
Last Post: matthewchubb
Information Toggle Power LED or update config via remote? 48design-cg 0 1,077 01-17-2023 05:32 PM
Last Post: 48design-cg
  T48G + EHS36 +Janra engage 75 not hanging up call kris.hetherington@firstsource.com 1 5,202 09-30-2022 03:23 AM
Last Post: knewgent
  T48G - TLS 1.2 Support for 3CX Futureweb 1 2,507 09-30-2022 12:55 AM
Last Post: complex1

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication